scanon, scanoff --
enable and disable scancode-to-character mapping
scanon [ /dev/ttyline . . . ]
scanoff [ /dev/ttyline . . . ]
The scanon script simultaneously sets the terminal
and the serial line to send PC scancodes (turns on
The scanoff script turns off PC-scancode mode.
With no arguments, scanon and scanoff affect the
scanon also calls the mapstr function to
set up the strings for the terminals function keys.
When scanon or scanoff are called without parameters,
the $TERM environment variable is used to determine the terminal
type. When a device is specified on the command line, the connect terminal
type for the device must be entered in the /etc/ttytype file
for the command to work correctly.
Note that for a Wyse-60 terminal the type (or $TERM, if the
command is run from the terminal itself) must be set to wy60-pc.
© 2003 Caldera International, Inc. All rights reserved.
SCO OpenServer Release 5.0.7 -- 11 February 2003