terminfo(M)

terminfo -- terminal capability database

Syntax

/usr/lib/terminfo/?/

Description

terminfo is a compiled database (see tic(C)) describing the capabilities of terminals. Terminals are described in terminfo source descriptions by giving a set of capabilities which they have, by describing how operations are performed, by describing padding requirements, and by specifying initialization sequences. This database is used, for example, by vi(C) and curses(S), so they can work with a variety of terminals without changes to the programs. To obtain the source description for a terminal, use the -I option of infocmp(ADM). When doing an infocmp for the terminal you are on, there is no difference between infocmp and infocmp -I.

Entries in terminfo source files consist of a number of fields separated by commas. White space after each comma is ignored. The first line of each terminal description in the terminfo database gives the name by which terminfo knows the terminal, separated by bar (|) characters. The first name given is the most common abbreviation for the terminal (this is the one to use to set the environment variable TERM in $HOME .profile; see profile(M)); the last name given should be a long name fully identifying the terminal, and all others are understood as synonyms for the terminal name. All names but the last should contain no blanks and must be unique in the first 14 characters; the last name may contain blanks for readability.

Terminal names (except for the last verbose entry) should be chosen using the following conventions. The particular piece of hardware making up the terminal should have a root name chosen, for example, for the AT&T 4425 terminal, att4425. Modes that the hardware can be in, or user preferences, should be indicated by appending a hyphen and an indicator of the mode. See term(M) for examples and more information on choosing names and synonyms.

Part 1: Terminal capabilities

Capabilities in terminfo are of three types: boolean capabilities (which show that the terminal has some particular feature), numeric capabilities (which specify the size of the terminal or particular features), and string capabilities (which provide a sequence that can be used to perform particular terminal operations).

In the following tables, a ``Variable'' is the name by which a C programmer accesses a capability (at the terminfo level). A ``Capname'' is the short name for a capability used in the source description. It is used by a person updating the database and by the tput(C) command when asking what the value of the capability is for a particular terminal. A ``Termcap Code'' is a two-letter code that corresponds to the old termcap capability name.

Capability names have no hard length limit, but an informal limit of five characters has been adopted to keep them short. Whenever possible, names are chosen to be the same as or similar to those specified by the ANSI X3.64-1979 standard. Semantics are also intended to match those of the ANSI standard.

All string capabilities listed below may have padding specified, with the exception of those used for input. Input capabilities, listed under the ``Strings'' section in the following table, have names beginning with key_. The following indicators may appear at the end of the ``Description'' for a variable.

(G): indicates that the string is passed through tparm() with parameters (parms) as given (#[i])
(): indicates that padding may be based on the number of lines affected
(#[i]): indicates the i[th] parameter
(): not present in all versions of termcap

Booleans ordered by variable name

Variable Cap- Termcap Description

name code

auto_left_margin bw bw cub1 wraps from column 0 to last column

auto_right_margin am am Terminal has automatic margins

back_color_erase bce be Screen erased with background color

can_change ccc cc Terminal can re-define existing color

ceol_standout_glitch xhp xs Standout not erased by overwriting (hp)

col_addr_glitch xhpa YA Only positive motion for hpa/mhpa caps

cpi_changes_res cpix YF Changing character pitch changes
resolution

cr_cancels_micro_mode crxm YB Using cr turns off micro mode

eat_newline_glitch xenl xn Newline ignored after 80 columns
(Concept)

erase_overstrike eo eo Can erase overstrikes with a blank

generic_type gn gn Generic line type (for example, dialup,
switch)

hard_copy hc hc Hardcopy terminal

hard_cursor chts HC Cursor is hard to see

has_meta_key km km Has a meta key (shift, sets parity bit)

has_print_wheel daisy YC Printer needs operator to change character set

has_status_line hs hs Has extra ``status line''

hue_lightness_saturation hls hl
color notation (Tektronix)

insert_null_glitch in in Insert mode distinguishes nulls

lpi_changes_res lpix YG Changing line pitch changes resolution

memory_above da da Display may be retained above the screen

memory_below db db Display may be retained below the screen

move_insert_mode mir mi Safe to move while in insert mode

move_standout_mode msgr ms Safe to move in standout modes

needs_xon_xoff nxon nx Padding won't work, xon/xoff required

no_esc_ctlc xsb xb Beehive (f1=escape, f2=ctrl C)

no_pad_char npc NP Pad character doesn't exist

non_dest_scroll_region ndscr ND Scrolling region is non-destructive

non_rev_rmcup nrrmc NR smcup does not reverse rmcup

over_strike os os Terminal overstrikes on hard-copy terminal

prtr_silent mc5i

row_addr_glitch xvpa YD Only positive motion for vpa/mvpa caps

semi_auto_right_margin sam YE Printing in last column causes cr

status_line_esc_ok eslok es Escape can be used on the status line

dest_tabs_magic_smso xt xt Destructive tabs, magic smso char (t1061)

tilde_glitch hz hz Hazeltine; cannot print tilde (~)

transparent_underline ul ul Underline character overstrikes

xon_xoff xon xo Terminal uses xon/xoff handshaking

Numbers ordered by variable name

Variable	Cap-	Termcap	Description
	name	code
auto_left_margin	bw	bw	cub1 wraps from column 0 to last column
auto_right_margin	am	am	Terminal has automatic margins
back_color_erase	bce	be	Screen erased with background color
can_change	ccc	cc	Terminal can re-define existing color
ceol_standout_glitch	xhp	xs	Standout not erased by overwriting (hp)
col_addr_glitch	xhpa	YA	Only positive motion for hpa/mhpa caps
cpi_changes_res	cpix	YF	Changing character pitch changes resolution
cr_cancels_micro_mode	crxm	YB	Using cr turns off micro mode
eat_newline_glitch	xenl	xn	Newline ignored after 80 columns (Concept)
erase_overstrike	eo	eo	Can erase overstrikes with a blank
generic_type	gn	gn	Generic line type (for example, dialup, switch)
hard_copy	hc	hc	Hardcopy terminal
hard_cursor	chts	HC	Cursor is hard to see
has_meta_key	km	km	Has a meta key (shift, sets parity bit)
has_print_wheel	daisy	YC	Printer needs operator to change character set
has_status_line	hs	hs	Has extra ``status line''
hue_lightness_saturation	hls	hl	color notation (Tektronix)
insert_null_glitch	in	in	Insert mode distinguishes nulls
lpi_changes_res	lpix	YG	Changing line pitch changes resolution
memory_above	da	da	Display may be retained above the screen
memory_below	db	db	Display may be retained below the screen
move_insert_mode	mir	mi	Safe to move while in insert mode
move_standout_mode	msgr	ms	Safe to move in standout modes
needs_xon_xoff	nxon	nx	Padding won't work, xon/xoff required
no_esc_ctlc	xsb	xb	Beehive (f1=escape, f2=ctrl C)
no_pad_char	npc	NP	Pad character doesn't exist
non_dest_scroll_region	ndscr	ND	Scrolling region is non-destructive
non_rev_rmcup	nrrmc	NR	smcup does not reverse rmcup
over_strike	os	os	Terminal overstrikes on hard-copy terminal
prtr_silent	mc5i
row_addr_glitch	xvpa	YD	Only positive motion for vpa/mvpa caps
semi_auto_right_margin	sam	YE	Printing in last column causes cr
status_line_esc_ok	eslok	es	Escape can be used on the status line
dest_tabs_magic_smso	xt	xt	Destructive tabs, magic smso char (t1061)
tilde_glitch	hz	hz	Hazeltine; cannot print tilde (~)
transparent_underline	ul	ul	Underline character overstrikes
xon_xoff	xon	xo	Terminal uses xon/xoff handshaking

Variable Cap- Termcap Description

name code

buffer_capacity bufsz Ya Number of bytes buffered before printing

columns cols co Number of columns in a line

dot_vert_spacing spinv Yb Spacing of pins vertically in pins per inch

dot_horz_spacing spinh Yc Spacing of dots horizontally in dots per inch

init_tabs it it Tabs initially every # spaces

label_height lh lh Number of rows in each label

label_width lw lw Number of columns in each label

lines lines li Number of lines on a screen or a page

lines_of_memory lm lm Lines of memory if > lines; 0 means varies

magic_cookie_glitch xmc sg Number of blank characters left by smso or rmso

max_attributes ma ma Maximum combined video attributes
terminal can display

max_colors colors Co Maximum number of colors on the screen

max_micro_address maddr Yd Maximum value in micro_..._address

max_micro_jump mjump Ye Maximum value in parm_..._micro

max_pairs pairs pa Maximum number of color-pairs on the screen

maximum_windows wnum MW Maximum number of definable windows

micro_col_size mcs Yf Character step size when in micro mode

micro_line_size mls Yg Line step size when in micro mode

no_color_video ncv NC Video attributes that can't be used with colors

number_of_pins npins Yh Number of pins in print-head

num_labels nlab Nl Number of labels on screen (start at 1)

output_res_char orc Yi Horizontal resolution in units per character

output_res_line orl Yj Vertical resolution in units per line

output_res_horz_inch orhi Yk Horizontal resolution in units per inch

output_res_vert_inch orvi Yl Vertical resolution in units per inch

padding_baud_rate pb pb Lowest baud rate where padding needed

print_rate cps Ym Print rate in characters per second

virtual_terminal vt vt Virtual terminal number (UNIX system)

wide_char_size widcs Yn Character step size when in double wide mode

width_status_line wsl ws Number of columns in status line

Strings ordered by variable name

Variable	Cap-	Termcap	Description
	name	code
buffer_capacity	bufsz	Ya	Number of bytes buffered before printing
columns	cols	co	Number of columns in a line
dot_vert_spacing	spinv	Yb	Spacing of pins vertically in pins per inch
dot_horz_spacing	spinh	Yc	Spacing of dots horizontally in dots per inch
init_tabs	it	it	Tabs initially every # spaces
label_height	lh	lh	Number of rows in each label
label_width	lw	lw	Number of columns in each label
lines	lines	li	Number of lines on a screen or a page
lines_of_memory	lm	lm	Lines of memory if > lines; 0 means varies
magic_cookie_glitch	xmc	sg	Number of blank characters left by smso or rmso
max_attributes	ma	ma	Maximum combined video attributes terminal can display
max_colors	colors	Co	Maximum number of colors on the screen
max_micro_address	maddr	Yd	Maximum value in micro_..._address
max_micro_jump	mjump	Ye	Maximum value in parm_..._micro
max_pairs	pairs	pa	Maximum number of color-pairs on the screen
maximum_windows	wnum	MW	Maximum number of definable windows
micro_col_size	mcs	Yf	Character step size when in micro mode
micro_line_size	mls	Yg	Line step size when in micro mode
no_color_video	ncv	NC	Video attributes that can't be used with colors
number_of_pins	npins	Yh	Number of pins in print-head
num_labels	nlab	Nl	Number of labels on screen (start at 1)
output_res_char	orc	Yi	Horizontal resolution in units per character
output_res_line	orl	Yj	Vertical resolution in units per line
output_res_horz_inch	orhi	Yk	Horizontal resolution in units per inch
output_res_vert_inch	orvi	Yl	Vertical resolution in units per inch
padding_baud_rate	pb	pb	Lowest baud rate where padding needed
print_rate	cps	Ym	Print rate in characters per second
virtual_terminal	vt	vt	Virtual terminal number (UNIX system)
wide_char_size	widcs	Yn	Character step size when in double wide mode
width_status_line	wsl	ws	Number of columns in status line

Variable Cap- Termcap Description

name code

acs_chars acsc ac Graphic charset pairs aAbBcC - def=vt100

back_tab cbt bt Back tab

bell bel bl Audible signal (bell)

carriage_return cr cr Carriage return ()

change_char_pitch cpi ZA Change number of characters per inch()

change_line_pitch lpi ZB Change number of lines per inch()

change_res_horz chr ZC Change horizontal resolution()

change_res_vert cvr ZD Change vertical resolution()

change_scroll_region csr cs Change to lines #1 through #2 (vt100) (G)

char_padding rmp rP Like ip but when in replace mode

char_set_names csnm Zy List of character set names

clear_all_tabs tbc ct Clear all tab stops

clear_margins mgc MC Clear all margins (top, bottom, and sides)

clear_screen clear cl Clear screen and home cursor ()

clr_bol el1 cb Clear to beginning of line, inclusive

clr_eol el ce Clear to end of line

clr_eos ed cd Clear to end of display ()

column_address hpa ch Horizontal position absolute (G)

command_character cmdch CC Terminal settable cmd character in prototype

create_window cwin CW Define win #1 to go from #2,#3 to #4,#5

cursor_address cup cm Move to row #1 col #2 (G)

cursor_down cud1 do Down one line

cursor_home home ho Home cursor (if no cup)

cursor_invisible civis vi Make cursor invisible

cursor_left cub1 le Move left one space

cursor_mem_address mrcup CM Memory relative cursor addressing (G)

cursor_normal cnorm ve Make cursor appear normal (undo vs/vi)

cursor_right cuf1 nd Non-destructive space
(cursor or carriage right)

cursor_to_ll ll ll Last line, first column (if no cup)

cursor_up cuu1 up Upline (cursor up)

cursor_visible cvvis vs Make cursor very visible

define_char defc ZE Define a character in a character set ()

delete_character dch1 dc Delete character ()

delete_line dl1 dl Delete line ()

delete_phone dial DI Dial phone number #1

dis_status_line dsl ds Disable status line

display_clock dclk DK Display time-of-day clock

display_pc_char dispc S1 Displays PC character

down_half_line hd hd Half-line down (forward 1/2 linefeed)

ena_acs enacs eA Enable alternate character set

enter_alt_charset_mode smacs as Start alternate character set

enter_am_mode smam SA Turn on automatic margins

enter_blink_mode blink mb Turn on blinking

enter_bold_mode bold md Turn on bold (extra bright) mode

enter_ca_mode smcup ti String to begin programs that use cup

enter_delete_mode smdc dm Delete mode (enter)

enter_dim_mode dim mh Turn on half-bright mode

enter_doublewide_mode swidm ZF Enable double wide printing

enter_draft_quality sdrfq ZG Set draft quality print

enter_insert_mode smir im Insert mode (enter)

enter_italics_mode sitm ZH Enable italics

enter_leftward_mode slm ZI Enable leftward carriage motion

enter_micro_mode smicm ZJ Enable micro motion capabilities

enter_near_letter_quality snlq ZK Set near-letter quality print

enter_normal_quality snrmq ZL Set normal quality print

enter_pc_charset_mode smsc S4 Enables PC-scancode mode

enter_protected_mode prot mp Turn on protected mode

enter_reverse_mode rev mr Turn on reverse video mode

enter_secure_mode invis mk Turn on blank mode (characters invisible)

enter_shadow_mode sshm ZM Enable shadow printing

enter_standout_mode smso so Begin standout mode

enter_subscript_mode ssubm ZN Enable subscript printing

enter_superscript_mode ssupm ZO Enable superscript printing

enter_underline_mode smul us Start underscore mode

enter_upward_mode sum ZP Enable upward carriage motion

enter_xon_mode smxon SX Turn on xon/xoff handshaking

erase_chars ech ec Erase #1 characters (G)

exit_alt_charset_mode rmacs ae End alternate character set

exit_am_mode rmam RA Turn off automatic margins

exit_attribute_mode sgr0 me Turn off all attributes

exit_ca_mode rmcup te String to end programs that use cup

exit_delete_mode rmdc ed End delete mode

exit_doublewide_mode rwidm ZQ Disable double wide printing

exit_insert_mode rmir ei End insert mode

exit_italics_mode ritm ZR Disable italics

exit_leftward_mode rlm ZS Enable rightward (normal) carriage motion

exit_micro_mode rmicm ZT Disable micro motion capabilities

exit_pc_charset_mode rmsc S5 Disables PC-scancode mode

exit_shadow_mode rshm ZU Disable shadow printing

exit_standout_mode rmso se End standout mode

exit_subscript_mode rsubm ZV Disable subscript printing

exit_superscript_mode rsupm ZW Disable superscript printing

exit_underline_mode rmul ue End underscore mode

exit_upward_mode rum ZX Enable downward (normal) carriage motion

exit_xon_mode rmxon RX Turn off xon/xoff handshaking

fixed_pause pause PA Pause for 2-3 seconds

flash_hook hook fh Flash the switch hook

flash_screen flash vb Visible bell (may not move cursor)

form_feed ff ff Hardcopy terminal page eject ()

from_status_line fsl fs Return from status line

goto_window wingo WG Got to window #1

hangup hup HU Hang-up phone

init_1string is1 i1 Terminal or printer initialization string

init_2string is2 is Terminal or printer initialization string

init_3string is3 i3 Terminal or printer initialization string

init_file if if Name of initialization file

init_prog iprog iP Path name of program for initialization

initialize_color initc Ic Initialize the definition of color

initialize_pair initp Ip Initialize color-pair

insert_character ich1 ic Insert character

insert_line il1 al Add new blank line ()

insert_padding ip ip Insert pad after character inserted ()

key_a1 ka1 K1 KEY_A1, 0534, upper left of keypad

key_a3 ka3 K3 KEY_A3, 0535, upper right of keypad

key_b2 kb2 K2 KEY_B2, 0536, center of keypad

key_backspace kbs kb KEY_BACKSPACE, 0407,
sent by backspace key

key_beg kbeg @1 KEY_BEG, 0542, sent by beg(inning) key

key_btab kcbt kB KEY_BTAB, 0541, sent by back-tab key

key_c1 kc1 K4 KEY_C1, 0537, lower left of keypad

key_c3 kc3 K5 KEY_C3, 0540, lower right of keypad

key_cancel kcan @2 KEY_CANCEL, 0543, sent by cancel key

key_catab ktbc ka KEY_CATAB, 0526, sent by clear-all-tabs key

key_clear kclr kC KEY_CLEAR, 0515, sent by clear-screen
or erase key

key_close kclo @3 KEY_CLOSE, 0544, sent by close key

key_command kcmd @4 KEY_COMMAND, 0545,
sent by cmd (command) key

key_copy kcpy @5 KEY_COPY, 0546, sent by copy key

key_create kcrt @6 KEY_CREATE, 0547, sent by create key

key_ctab kctab kt KEY_CTAB, 0525, sent by clear-tab key

key_dc kdch1 kD KEY_DC, 0512, sent by delete-character key

key_dl kdl1 kL KEY_DL, 0510, sent by delete-line key

key_down kcud1 kd KEY_DOWN, 0402, sent by terminal
down-arrow key

key_eic krmir kM KEY_EIC, 0514, sent by rmir
or smir in insert mode

key_end kend @7 KEY_END, 0550, sent by end key

key_enter kent @8 KEY_ENTER, 0527, sent by enter/send key

key_eol kel kE KEY_EOL, 0517, sent by clear-to-end-of-line key

key_eos ked kS KEY_EOS, 0516, sent by
clear-to-end-of-screen key

key_exit kext @9 KEY_EXIT, 0551, sent by exit key

key_f0 kf0 k0 KEY_F(0), 0410, sent by function key f0

key_f1 kf1 k1 KEY_F(1), 0411, sent by function key f1

key_f2 kf2 k2 KEY_F(2), 0412, sent by function key f2

key_f3 kf3 k3 KEY_F(3), 0413, sent by function key f3

key_f4 kf4 k4 KEY_F(4), 0414, sent by function key f4

key_f5 kf5 k5 KEY_F(5), 0415, sent by function key f5

key_f6 kf6 k6 KEY_F(6), 0416, sent by function key f6

key_f7 kf7 k7 KEY_F(7), 0417, sent by function key f7

key_f8 kf8 k8 KEY_F(8), 0420, sent by function key f8

key_f9 kf9 k9 KEY_F(9), 0421, sent by function key f9

key_f10 kf10 k; KEY_F(10), 0422, sent by function key f10

key_f11 kf11 F1 KEY_F(11), 0423, sent by function key f11

key_f12 kf12 F2 KEY_F(12), 0424, sent by function key f12

key_f13 kf13 F3 KEY_F(13), 0425, sent by function key f13

key_f14 kf14 F4 KEY_F(14), 0426, sent by function key f14

key_f15 kf15 F5 KEY_F(15), 0427, sent by function key f15

key_f16 kf16 F6 KEY_F(16), 0430, sent by function key f16

key_f17 kf17 F7 KEY_F(17), 0431, sent by function key f17

key_f18 kf18 F8 KEY_F(18), 0432, sent by function key f18

key_f19 kf19 F9 KEY_F(19), 0433, sent by function key f19

key_f20 kf20 FA KEY_F(20), 0434, sent by function key f20

key_f21 kf21 FB KEY_F(21), 0435, sent by function key f21

key_f22 kf22 FC KEY_F(22), 0436, sent by function key f22

key_f23 kf23 FD KEY_F(23), 0437, sent by function key f23

key_f24 kf24 FE KEY_F(24), 0440, sent by function key f24

key_f25 kf25 FF KEY_F(25), 0441, sent by function key f25

key_f26 kf26 FG KEY_F(26), 0442, sent by function key f26

key_f27 kf27 FH KEY_F(27), 0443, sent by function key f27

key_f28 kf28 FI KEY_F(28), 0444, sent by function key f28

key_f29 kf29 FJ KEY_F(29), 0445, sent by function key f29

key_f30 kf30 FK KEY_F(30), 0446, sent by function key f30

key_f31 kf31 FL KEY_F(31), 0447, sent by function key f31

key_f32 kf32 FM KEY_F(32), 0450, sent by function key f32

key_f33 kf33 FN KEY_F(33), 0451, sent by function key f13

key_f34 kf34 FO KEY_F(34), 0452, sent by function key f34

key_f35 kf35 FP KEY_F(35), 0453, sent by function key f35

key_f36 kf36 FQ KEY_F(36), 0454, sent by function key f36

key_f37 kf37 FR KEY_F(37), 0455, sent by function key f37

key_f38 kf38 FS KEY_F(38), 0456, sent by function key f38

key_f39 kf39 FT KEY_F(39), 0457, sent by function key f39

key_f40 kf40 FU KEY_F(40), 0460, sent by function key f40

key_f41 kf41 FV KEY_F(41), 0461, sent by function key f41

key_f42 kf42 FW KEY_F(42), 0462, sent by function key f42

key_f43 kf43 FX KEY_F(43), 0463, sent by function key f43

Variable	Cap-	Termcap	Description
	name	code
acs_chars	acsc	ac	Graphic charset pairs aAbBcC - def=vt100
back_tab	cbt	bt	Back tab
bell	bel	bl	Audible signal (bell)
carriage_return	cr	cr	Carriage return ()
change_char_pitch	cpi	ZA	Change number of characters per inch()
change_line_pitch	lpi	ZB	Change number of lines per inch()
change_res_horz	chr	ZC	Change horizontal resolution()
change_res_vert	cvr	ZD	Change vertical resolution()
change_scroll_region	csr	cs	Change to lines #1 through #2 (vt100) (G)
char_padding	rmp	rP	Like ip but when in replace mode
char_set_names	csnm	Zy	List of character set names
clear_all_tabs	tbc	ct	Clear all tab stops
clear_margins	mgc	MC	Clear all margins (top, bottom, and sides)
clear_screen	clear	cl	Clear screen and home cursor ()
clr_bol	el1	cb	Clear to beginning of line, inclusive
clr_eol	el	ce	Clear to end of line
clr_eos	ed	cd	Clear to end of display ()
column_address	hpa	ch	Horizontal position absolute (G)
command_character	cmdch	CC	Terminal settable cmd character in prototype
create_window	cwin	CW	Define win #1 to go from #2,#3 to #4,#5
cursor_address	cup	cm	Move to row #1 col #2 (G)
cursor_down	cud1	do	Down one line
cursor_home	home	ho	Home cursor (if no cup)
cursor_invisible	civis	vi	Make cursor invisible
cursor_left	cub1	le	Move left one space
cursor_mem_address	mrcup	CM	Memory relative cursor addressing (G)
cursor_normal	cnorm	ve	Make cursor appear normal (undo vs/vi)
cursor_right	cuf1	nd	Non-destructive space (cursor or carriage right)
cursor_to_ll	ll	ll	Last line, first column (if no cup)
cursor_up	cuu1	up	Upline (cursor up)
cursor_visible	cvvis	vs	Make cursor very visible
define_char	defc	ZE	Define a character in a character set ()
delete_character	dch1	dc	Delete character ()
delete_line	dl1	dl	Delete line ()
delete_phone	dial	DI	Dial phone number #1
dis_status_line	dsl	ds	Disable status line
display_clock	dclk	DK	Display time-of-day clock
display_pc_char	dispc	S1	Displays PC character
down_half_line	hd	hd	Half-line down (forward 1/2 linefeed)
ena_acs	enacs	eA	Enable alternate character set
enter_alt_charset_mode	smacs	as	Start alternate character set
enter_am_mode	smam	SA	Turn on automatic margins
enter_blink_mode	blink	mb	Turn on blinking
enter_bold_mode	bold	md	Turn on bold (extra bright) mode
enter_ca_mode	smcup	ti	String to begin programs that use cup
enter_delete_mode	smdc	dm	Delete mode (enter)
enter_dim_mode	dim	mh	Turn on half-bright mode
enter_doublewide_mode	swidm	ZF	Enable double wide printing
enter_draft_quality	sdrfq	ZG	Set draft quality print
enter_insert_mode	smir	im	Insert mode (enter)
enter_italics_mode	sitm	ZH	Enable italics
enter_leftward_mode	slm	ZI	Enable leftward carriage motion
enter_micro_mode	smicm	ZJ	Enable micro motion capabilities
enter_near_letter_quality	snlq	ZK	Set near-letter quality print
enter_normal_quality	snrmq	ZL	Set normal quality print
enter_pc_charset_mode	smsc	S4	Enables PC-scancode mode
enter_protected_mode	prot	mp	Turn on protected mode
enter_reverse_mode	rev	mr	Turn on reverse video mode
enter_secure_mode	invis	mk	Turn on blank mode (characters invisible)
enter_shadow_mode	sshm	ZM	Enable shadow printing
enter_standout_mode	smso	so	Begin standout mode
enter_subscript_mode	ssubm	ZN	Enable subscript printing
enter_superscript_mode	ssupm	ZO	Enable superscript printing
enter_underline_mode	smul	us	Start underscore mode
enter_upward_mode	sum	ZP	Enable upward carriage motion
enter_xon_mode	smxon	SX	Turn on xon/xoff handshaking
erase_chars	ech	ec	Erase #1 characters (G)
exit_alt_charset_mode	rmacs	ae	End alternate character set
exit_am_mode	rmam	RA	Turn off automatic margins
exit_attribute_mode	sgr0	me	Turn off all attributes
exit_ca_mode	rmcup	te	String to end programs that use cup
exit_delete_mode	rmdc	ed	End delete mode
exit_doublewide_mode	rwidm	ZQ	Disable double wide printing
exit_insert_mode	rmir	ei	End insert mode
exit_italics_mode	ritm	ZR	Disable italics
exit_leftward_mode	rlm	ZS	Enable rightward (normal) carriage motion
exit_micro_mode	rmicm	ZT	Disable micro motion capabilities
exit_pc_charset_mode	rmsc	S5	Disables PC-scancode mode
exit_shadow_mode	rshm	ZU	Disable shadow printing
exit_standout_mode	rmso	se	End standout mode
exit_subscript_mode	rsubm	ZV	Disable subscript printing
exit_superscript_mode	rsupm	ZW	Disable superscript printing
exit_underline_mode	rmul	ue	End underscore mode
exit_upward_mode	rum	ZX	Enable downward (normal) carriage motion
exit_xon_mode	rmxon	RX	Turn off xon/xoff handshaking
fixed_pause	pause	PA	Pause for 2-3 seconds
flash_hook	hook	fh	Flash the switch hook
flash_screen	flash	vb	Visible bell (may not move cursor)
form_feed	ff	ff	Hardcopy terminal page eject ()
from_status_line	fsl	fs	Return from status line
goto_window	wingo	WG	Got to window #1
hangup	hup	HU	Hang-up phone
init_1string	is1	i1	Terminal or printer initialization string
init_2string	is2	is	Terminal or printer initialization string
init_3string	is3	i3	Terminal or printer initialization string
init_file	if	if	Name of initialization file
init_prog	iprog	iP	Path name of program for initialization
initialize_color	initc	Ic	Initialize the definition of color
initialize_pair	initp	Ip	Initialize color-pair
insert_character	ich1	ic	Insert character
insert_line	il1	al	Add new blank line ()
insert_padding	ip	ip	Insert pad after character inserted ()
key_a1	ka1	K1	KEY_A1, 0534, upper left of keypad
key_a3	ka3	K3	KEY_A3, 0535, upper right of keypad
key_b2	kb2	K2	KEY_B2, 0536, center of keypad
key_backspace	kbs	kb	KEY_BACKSPACE, 0407, sent by backspace key
key_beg	kbeg	@1	KEY_BEG, 0542, sent by beg(inning) key
key_btab	kcbt	kB	KEY_BTAB, 0541, sent by back-tab key
key_c1	kc1	K4	KEY_C1, 0537, lower left of keypad
key_c3	kc3	K5	KEY_C3, 0540, lower right of keypad
key_cancel	kcan	@2	KEY_CANCEL, 0543, sent by cancel key
key_catab	ktbc	ka	KEY_CATAB, 0526, sent by clear-all-tabs key
key_clear	kclr	kC	KEY_CLEAR, 0515, sent by clear-screen or erase key
key_close	kclo	@3	KEY_CLOSE, 0544, sent by close key
key_command	kcmd	@4	KEY_COMMAND, 0545, sent by cmd (command) key
key_copy	kcpy	@5	KEY_COPY, 0546, sent by copy key
key_create	kcrt	@6	KEY_CREATE, 0547, sent by create key
key_ctab	kctab	kt	KEY_CTAB, 0525, sent by clear-tab key
key_dc	kdch1	kD	KEY_DC, 0512, sent by delete-character key
key_dl	kdl1	kL	KEY_DL, 0510, sent by delete-line key
key_down	kcud1	kd	KEY_DOWN, 0402, sent by terminal down-arrow key
key_eic	krmir	kM	KEY_EIC, 0514, sent by rmir or smir in insert mode
key_end	kend	@7	KEY_END, 0550, sent by end key
key_enter	kent	@8	KEY_ENTER, 0527, sent by enter/send key
key_eol	kel	kE	KEY_EOL, 0517, sent by clear-to-end-of-line key
key_eos	ked	kS	KEY_EOS, 0516, sent by clear-to-end-of-screen key
key_exit	kext	@9	KEY_EXIT, 0551, sent by exit key
key_f0	kf0	k0	KEY_F(0), 0410, sent by function key f0
key_f1	kf1	k1	KEY_F(1), 0411, sent by function key f1
key_f2	kf2	k2	KEY_F(2), 0412, sent by function key f2
key_f3	kf3	k3	KEY_F(3), 0413, sent by function key f3
key_f4	kf4	k4	KEY_F(4), 0414, sent by function key f4
key_f5	kf5	k5	KEY_F(5), 0415, sent by function key f5
key_f6	kf6	k6	KEY_F(6), 0416, sent by function key f6
key_f7	kf7	k7	KEY_F(7), 0417, sent by function key f7
key_f8	kf8	k8	KEY_F(8), 0420, sent by function key f8
key_f9	kf9	k9	KEY_F(9), 0421, sent by function key f9
key_f10	kf10	k;	KEY_F(10), 0422, sent by function key f10
key_f11	kf11	F1	KEY_F(11), 0423, sent by function key f11
key_f12	kf12	F2	KEY_F(12), 0424, sent by function key f12
key_f13	kf13	F3	KEY_F(13), 0425, sent by function key f13
key_f14	kf14	F4	KEY_F(14), 0426, sent by function key f14
key_f15	kf15	F5	KEY_F(15), 0427, sent by function key f15
key_f16	kf16	F6	KEY_F(16), 0430, sent by function key f16
key_f17	kf17	F7	KEY_F(17), 0431, sent by function key f17
key_f18	kf18	F8	KEY_F(18), 0432, sent by function key f18
key_f19	kf19	F9	KEY_F(19), 0433, sent by function key f19
key_f20	kf20	FA	KEY_F(20), 0434, sent by function key f20
key_f21	kf21	FB	KEY_F(21), 0435, sent by function key f21
key_f22	kf22	FC	KEY_F(22), 0436, sent by function key f22
key_f23	kf23	FD	KEY_F(23), 0437, sent by function key f23
key_f24	kf24	FE	KEY_F(24), 0440, sent by function key f24
key_f25	kf25	FF	KEY_F(25), 0441, sent by function key f25
key_f26	kf26	FG	KEY_F(26), 0442, sent by function key f26
key_f27	kf27	FH	KEY_F(27), 0443, sent by function key f27
key_f28	kf28	FI	KEY_F(28), 0444, sent by function key f28
key_f29	kf29	FJ	KEY_F(29), 0445, sent by function key f29
key_f30	kf30	FK	KEY_F(30), 0446, sent by function key f30
key_f31	kf31	FL	KEY_F(31), 0447, sent by function key f31
key_f32	kf32	FM	KEY_F(32), 0450, sent by function key f32
key_f33	kf33	FN	KEY_F(33), 0451, sent by function key f13
key_f34	kf34	FO	KEY_F(34), 0452, sent by function key f34
key_f35	kf35	FP	KEY_F(35), 0453, sent by function key f35
key_f36	kf36	FQ	KEY_F(36), 0454, sent by function key f36
key_f37	kf37	FR	KEY_F(37), 0455, sent by function key f37
key_f38	kf38	FS	KEY_F(38), 0456, sent by function key f38
key_f39	kf39	FT	KEY_F(39), 0457, sent by function key f39
key_f40	kf40	FU	KEY_F(40), 0460, sent by function key f40
key_f41	kf41	FV	KEY_F(41), 0461, sent by function key f41
key_f42	kf42	FW	KEY_F(42), 0462, sent by function key f42
key_f43	kf43	FX	KEY_F(43), 0463, sent by function key f43

key_f44 kf44 FY KEY_F(44), 0464, sent by function key f44

key_f45 kf45 FZ KEY_F(45), 0465, sent by function key f45

key_f46 kf46 Fa KEY_F(46), 0466, sent by function key f46

key_f47 kf47 Fb KEY_F(47), 0467, sent by function key f47

key_f48 kf48 Fc KEY_F(48), 0470, sent by function key f48

key_f49 kf49 Fd KEY_F(49), 0471, sent by function key f49

key_f50 kf50 Fe KEY_F(50), 0472, sent by function key f50

key_f51 kf51 Ff KEY_F(51), 0473, sent by function key f51

key_f52 kf52 Fg KEY_F(52), 0474, sent by function key f52

key_f53 kf53 Fh KEY_F(53), 0475, sent by function key f53

key_f54 kf54 Fi KEY_F(54), 0476, sent by function key f54

key_f55 kf55 Fj KEY_F(55), 0477, sent by function key f55

key_f56 kf56 Fk KEY_F(56), 0500, sent by function key f56

key_f57 kf57 Fl KEY_F(57), 0501, sent by function key f57

key_f58 kf58 Fm KEY_F(58), 0502, sent by function key f58

key_f59 kf59 Fn KEY_F(59), 0503, sent by function key f59

key_f60 kf60 Fo KEY_F(60), 0504, sent by function key f60

key_f61 kf61 Fp KEY_F(61), 0505, sent by function key f61

key_f62 kf62 Fq KEY_F(62), 0506, sent by function key f62

key_f63 kf63 Fr KEY_F(63), 0507, sent by function key f63

key_find kfnd @0 KEY_FIND, 0552, sent by find key

key_help khlp %1 KEY_HELP, 0553, sent by help key

key_home khome kh KEY_HOME, 0406, sent by home key

key_ic kich1 kI KEY_IC, 0513, sent by ins-char/enter
ins-mode key

key_il kil1 kA KEY_IL, 0511, sent by insert-line key

key_left kcub1 kl KEY_LEFT, 0404, sent by terminal
left-arrow key

key_ll kll kH KEY_LL, 0533, sent by home-down key

key_mark kmrk %2 KEY_MARK, 0554, sent by mark key

key_message kmsg %3 KEY_MESSAGE, 0555, sent by message key

key_move kmov %4 KEY_MOVE, 0556, sent by move key

key_next knxt %5 KEY_NEXT, 0557, sent by next key

key_npage knp kN KEY_NPAGE, 0522, sent by next-page key

key_open kopn %6 KEY_OPEN, 0560, sent by open key

key_options kopt %7 KEY_OPTIONS, 0561, sent by options key

key_ppage kpp kP KEY_PPAGE, 0523, sent by previous-page key

key_previous kprv %8 KEY_PREVIOUS, 0562, sent by
previous-object key

key_print kprt %9 KEY_PRINT, 0532, sent by print or copy key

key_redo krdo 0 KEY_REDO, 0563, sent by redo key

key_reference kref &1 KEY_REFERENCE, 0564, sent by ref(erence) key

key_refresh krfr &2 KEY_REFRESH, 0565, sent by refresh key

key_replace krpl &3 KEY_REPLACE, 0566, sent by replace key

key_restart krst &4 KEY_RESTART, 0567, sent by restart key

key_resume kres &5 KEY_RESUME, 0570, sent by resume key

key_right kcuf1 kr KEY_RIGHT, 0405, sent by terminal right-arrow key

key_save ksav &6 KEY_SAVE, 0571, sent by save key

key_sbeg kBEG &9 KEY_SBEG, 0572, sent by shifted beginning key

key_scancel kCAN &0 KEY_SCANCEL, 0573, sent by shifted cancel key

key_scommand kCMD 1 KEY_SCOMMAND, 0574, sent by shifted
command key

key_scopy kCPY 2 KEY_SCOPY, 0575, sent by shifted copy key

key_screate kCRT 3 KEY_SCREATE, 0576, sent by shifted create key

key_sdc kDC 4 KEY_SDC, 0577, sent by shifted delete-char key

key_sdl kDL 5 KEY_SDL, 0600, sent by shifted delete-line key

key_select kslt 6 KEY_SELECT, 0601, sent by select key

key_send kEND 7 KEY_SEND, 0602, sent by shifted end key

key_seol kEOL 8 KEY_SEOL, 0603, sent by shifted clear-line key

key_sexit kEXT 9 KEY_SEXIT, 0604, sent by shifted exit key

key_sf kind kF KEY_SF, 0520, sent by scroll-forward/down key

key_sfind kFND 0 KEY_SFIND, 0605, sent by shifted find key

key_shelp kHLP #1 KEY_SHELP, 0606, sent by shifted help key

key_shome kHOM #2 KEY_SHOME, 0607, sent by shifted home key

key_sic kIC #3 KEY_SIC, 0610, sent by shifted input key

key_sleft kLFT #4 KEY_SLEFT, 0611, sent by shifted left-arrow key

key_smessage kMSG %a KEY_SMESSAGE, 0612, sent by shifted message key

key_smove kMOV %b KEY_SMOVE, 0613, sent by shifted move key

key_snext kNXT %c KEY_SNEXT, 0614, sent by shifted next key

key_soptions kOPT %d KEY_SOPTIONS, 0615, sent by shifted options key

key_sprevious kPRV %e KEY_SPREVIOUS, 0616, sent by shifted prev key

key_sprint kPRT %f KEY_SPRINT, 0617, sent by shifted print key

key_sr kri kR KEY_SR, 0521, sent by scroll-backward/up key

key_sredo kRDO %g KEY_SREDO, 0620, sent by shifted redo key

key_sreplace kRPL %h KEY_SREPLACE, 0621, sent by shifted replace key

key_sright kRIT %i KEY_SRIGHT, 0622, sent by shifted right-arrow key

key_srsume kRES %j KEY_SRSUME, 0623, sent by shifted resume key

key_ssave kSAV !1 KEY_SSAVE, 0624, sent by shifted save key

key_ssuspend kSPD !2 KEY_SSUSPEND, 0625,
sent by shifted suspend key

key_stab khts kT KEY_STAB, 0524, sent by set-tab key

key_sundo kUND !3 KEY_SUNDO, 0626, sent by shifted undo key

key_suspend kspd &7 KEY_SUSPEND, 0627, sent by suspend key

key_undo kund &8 KEY_UNDO, 0630, sent by undo key

key_up kcuu1 ku KEY_UP, 0403, sent by terminal up-arrow key

keypad_local rmkx ke Out of ``keypad-transmit'' mode

keypad_xmit smkx ks Put terminal in ``keypad-transmit'' mode

lab_f0 lf0 l0 Labels on function key f0 if not f0

lab_f1 lf1 l1 Labels on function key f1 if not f1

lab_f2 lf2 l2 Labels on function key f2 if not f2

lab_f3 lf3 l3 Labels on function key f3 if not f3

lab_f4 lf4 l4 Labels on function key f4 if not f4

lab_f5 lf5 l5 Labels on function key f5 if not f5

lab_f6 lf6 l6 Labels on function key f6 if not f6

lab_f7 lf7 l7 Labels on function key f7 if not f7

lab_f8 lf8 l8 Labels on function key f8 if not f8

lab_f9 lf9 l9 Labels on function key f9 if not f9

lab_f10 lf10 la Labels on function key f10 if not f10

label_format fln Lf Label format

label_off rmln LF Turn off soft labels

label_on smln LO Turn on soft labels

meta_off rmm mo Turn off ``meta mode''

meta_on smm mm Turn on ``meta mode'' (8th bit)

micro_column_address mhpa ZY Like column_address for
micro adjustment

micro_down mcud1 ZZ Like cursor_down for micro adjustment

micro_left mcub1 Za Like cursor_left for micro adjustment

micro_right mcuf1 Zb Like cursor_right for micro adjustment

micro_row_address mvpa Zc Like row_address for micro adjustment

micro_up mcuu1 Zd Like cursor_up for micro adjustment

newline nel nw Newline (behaves like cr followed by lf)

order_of_pins porder Ze Matches software bits to print-head pins

orig_colors oc oc Set all color(-pair)s to the original ones

orig_pair op op Set default color-pair to the original one

pad_char pad pc Pad character (rather than null)

parm_dch dch DC Delete #1 chars (G)

parm_delete_line dl DL Delete #1 lines (G)

parm_down_cursor cud DO Move down #1 lines. (G)

parm_down_micro mcud Zf Like parm_down_cursor for
micro adjust. (G)

parm_ich ich IC Insert #1 blank chars (G)

parm_index indn SF Scroll forward #1 lines. (G)

parm_insert_line il AL Add #1 new blank lines (G)

parm_left_cursor cub LE Move cursor left #1 spaces (G)

parm_left_micro mcub Zg Like parm_left_cursor for micro adjust. ()

parm_right_cursor cuf RI Move right #1 spaces. (G)

parm_right_micro mcuf Zh Like parm_right_cursor for micro adjust. ()

parm_rindex rin SR Scroll backward #1 lines. (G)

parm_up_cursor cuu UP Move cursor up #1 lines. (G)

parm_up_micro mcuu Zi Like parm_up_cursor for micro adjust. ()

pkey_key pfkey pk Prog funct key #1 to type string #2

pkey_local pfloc pl Prog funct key #1 to execute string #2

pkey_xmit pfx px Prog funct key #1 to xmit string #2

plab_norm pln pn Prog label #1 to show string #2

print_screen mc0 ps Print contents of the screen

prtr_non mc5p pO Turn on the printer for #1 bytes

prtr_off mc4 pf Turn off the printer

prtr_on mc5 po Turn on the printer

pulse pulse PU Select pulse dialing

quick_dial qdial QD Dial phone number #1, without
progress detection

remove_clock rmclk RC Remove time-of-day clock

repeat_char rep rp Repeat char #1 #2 times (G)

req_for_input rfi RF Send next input char (for ptys)

reset_1string rs1 r1 Reset terminal completely to sane modes

reset_2string rs2 r2 Reset terminal completely to sane modes

reset_3string rs3 r3 Reset terminal completely to sane modes

reset_file rf rf Name of file containing reset string

restore_cursor rc rc Restore cursor to position of last sc

row_address vpa cv Vertical position absolute (G)

save_cursor sc sc Save cursor position

scroll_forward ind sf Scroll text up

scroll_reverse ri sr Scroll text down

select_char_set scs Zj Select character set ()

set_attributes sgr sa Define the video attributes (G) #1-#9

set_background setb Sb Set current background color

set_bottom_margin smgb Zk Set bottom margin at current line

set_bottom_margin_parm smgbp Zl Set bottom margin at line #1 ()

set_clock sclk SC Set time-of-day clock

set_color_pair scp sp Set current color-pair

set_foreground setf Sf Set current foreground color1

set_left_margin smgl ML Set left margin at current line

set_left_margin_parm smglp Zm Set left margin at column #1 ()

set_right_margin smgr MR Set right margin at current column

set_right_margin_parm smgrp Zn Set right margin at column #1 ()

set_tab hts st Set a tab in all rows, current column

set_top_margin smgt Zo Set top margin at current line

set_top_margin_parm smgtp Zp Set top margin at line #1 ()

set_window wind wi Current window is lines #1-#2 cols #3-#4 (G)

start_bit_image sbim Zq Start printing bit image graphics ()

start_char_set_def scsd Zr Start definition of a character set ()

stop_bit_image rbim Zs End printing bit image graphics

stop_char_set_def rcsd Zt End definition of a character set

subscript_characters subcs Zu List of ``subscript-able'' characters

superscript_characters supcs Zv List of ``superscript-able'' characters

tab ht ta Tab to next 8-space hardware tab stop

these_cause_cr docr Zw Printing any of these chars causes cr

to_status_line tsl ts Go to status line, col #1 (G)

tone tone TO Select touch tone dialing

underline_char uc uc Underscore one char and move past it

up_half_line hu hu Half-line up (reverse 1/2 linefeed)

user0 u0 u0 User string 0

user1 u1 u1 User string 1

user2 u2 u2 User string 4

user3 u3 u3 User string 3

user4 u4 u4 User string 4

user5 u5 u5 User string 5

user6 u6 u6 User string 6

user7 u7 u7 User string 7

user8 u8 u8 User string 8

user9 u9 u9 User string 9

wait_tone wait WA Wait for dial tone

xoff_character xoffc XF X-off character

xon_character xonc XN X-on character

xon_character xonc XN Alternate XON character (scancode mode)

xoff_character xoffc XF Alternate XOFF character (scancode mode)

zero_motion zerom Zx No motion for the subsequent character

Booleans ordered by capname

Cap- Variable Termcap Description

name code

am auto_right_margin am Terminal has automatic margins

bw auto_left_margin bw cub1 wraps from column 0 to last column

ccc can_change cc Terminal can re-define existing color

chts hard_cursor HC Cursor is hard to see

cpix cpi_changes_res YF Changing character pitch changes resolution

cps print_rate Ym Print rate in characters per second

crxm cr_cancels_micro_modem YB Using cr turns off micro mode

cwin create_window CW Define win #1 to go from #2,#3 to #4,#5

da memory_above da Display may be retained above the screen

daisy has_print_wheel YC Printer needs operator to change character set

dclk display_clock DK Display time-of-day clock

db memory_below db Display may be retained below the screen

dial dial_phone DI Dial phone number #1

eo erase_overstrike eo Can erase overstrikes with a blank

eslok status_line_esc_ok es Escape can be used on the status line

gn generic_type gn Generic line type (e.g., dialup, switch)

hc hard_copy hc Hardcopy terminal

hls hue_lightness_saturation hl Terminal uses only HLS
color notation (Tektronix)

hs has_status_line hs Has extra ``status line''

hz tilde_glitch hz Hazeltine; can't print tilde (~)

in insert_null_glitch in Insert mode distinguishes nulls

km has_meta_key km Has a meta key (shift, sets parity bit)

lpix lpi_changes_res YG Changing line pitch changes resolution

mc5i prtr_silent

mir move_insert_mode mi Safe to move while in insert mode

msgr move_standout_mode ms Safe to move in standout modes

npc no_pad_char NP Pad character doesn't exist

nrrmc non_rev_rmcup NR smcup does not reverse rmcup

nxon needs_xon_xoff nx Padding won't work, xon/xoff required

os over_strike os Terminal overstrikes on hard-copy terminal

sam semi_auto_right_margin YE Printing in last column causes cr

ul transparent_underline ul Underline character overstrikes

xenl eat_newline_glitch xn Newline ignored after 80 columns (Concept)

xhp ceol_standout_glitch xs Standout not erased by overwriting (hp)

xhpa col_addr_glitch YA Only positive motion for hpa/mhpa caps

xon xon_xoff xo Terminal uses xon/xoff handshaking

xsb no_esc_ctlc xb Beehive (f1=escape, f2=ctrl C)

xt dest_tabs_magic_smso xt Destructive tabs, magic smso char (t1061)

xvpa row_addr_glitch YD Only positive motion for vpa/mvpa caps

Numbers ordered by variable name

Cap-	Variable	Termcap	Description
name		code
am	auto_right_margin	am	Terminal has automatic margins
bw	auto_left_margin	bw	cub1 wraps from column 0 to last column
ccc	can_change	cc	Terminal can re-define existing color
chts	hard_cursor	HC	Cursor is hard to see
cpix	cpi_changes_res	YF	Changing character pitch changes resolution
cps	print_rate	Ym	Print rate in characters per second
crxm	cr_cancels_micro_modem	YB	Using cr turns off micro mode
cwin	create_window	CW	Define win #1 to go from #2,#3 to #4,#5
da	memory_above	da	Display may be retained above the screen
daisy	has_print_wheel	YC	Printer needs operator to change character set
dclk	display_clock	DK	Display time-of-day clock
db	memory_below	db	Display may be retained below the screen
dial	dial_phone	DI	Dial phone number #1
eo	erase_overstrike	eo	Can erase overstrikes with a blank
eslok	status_line_esc_ok	es	Escape can be used on the status line
gn	generic_type	gn	Generic line type (e.g., dialup, switch)
hc	hard_copy	hc	Hardcopy terminal
hls	hue_lightness_saturation	hl	Terminal uses only HLS color notation (Tektronix)
hs	has_status_line	hs	Has extra ``status line''
hz	tilde_glitch	hz	Hazeltine; can't print tilde (~)
in	insert_null_glitch	in	Insert mode distinguishes nulls
km	has_meta_key	km	Has a meta key (shift, sets parity bit)
lpix	lpi_changes_res	YG	Changing line pitch changes resolution
mc5i	prtr_silent
mir	move_insert_mode	mi	Safe to move while in insert mode
msgr	move_standout_mode	ms	Safe to move in standout modes
npc	no_pad_char	NP	Pad character doesn't exist
nrrmc	non_rev_rmcup	NR	smcup does not reverse rmcup
nxon	needs_xon_xoff	nx	Padding won't work, xon/xoff required
os	over_strike	os	Terminal overstrikes on hard-copy terminal
sam	semi_auto_right_margin	YE	Printing in last column causes cr
ul	transparent_underline	ul	Underline character overstrikes
xenl	eat_newline_glitch	xn	Newline ignored after 80 columns (Concept)
xhp	ceol_standout_glitch	xs	Standout not erased by overwriting (hp)
xhpa	col_addr_glitch	YA	Only positive motion for hpa/mhpa caps
xon	xon_xoff	xo	Terminal uses xon/xoff handshaking
xsb	no_esc_ctlc	xb	Beehive (f1=escape, f2=ctrl C)
xt	dest_tabs_magic_smso	xt	Destructive tabs, magic smso char (t1061)
xvpa	row_addr_glitch	YD	Only positive motion for vpa/mvpa caps

Cap- Variable Termcap Description

name code

bufsz buffer_capacity Ya Number of bytes buffered before printing

colors max_colors Co Maximum number of colors on the screen

cols columns co Number of columns in a line

cps print_rate Ym Average print rate in characters per second

it init_tabs it Tabs initially every # spaces

lh label_height lh Number of rows in each label

lines lines li Number of lines on a screen or a page

lm lines_of_memory lm Lines of memory if > lines; 0 means varies

lw label_width lw Number of columns in each label

maddr max_micro_address Yd Maximum value in micro_..._address

mcs micro_col_size Yf Character step size when in micro mode

mjump max_micro_jump Ye Maximum value in parm_..._micro

mls micro_line_size Yg Line step size when in micro mode

ncv no_color_video NC Video attributes that can't be used with colors

nlab num_labels Nl Number of labels on screen (start at 1)

npins number_of_pins Yh Number of pins in print-head

orc output_res_char Yi Horizontal resolution in units per character

orhi output_res_horz_inch Yk Horizontal resolution in units per inch

orl output_res_line Yj Vertical resolution in units per line

orvi output_res_vert_inch Yl Vertical resolution in units per inch

pairs max_pairs pa Maximum number of color-pairs on the screen

pb padding_baud_rate pb Lowest baud rate where padding needed

spinh dot_horz_spacing Yc Spacing of dots horizontally in dots per inch

spinv dot_vert_spacing Yb Spacing of pins vertically in pins per inch

vt virtual_terminal vt Virtual terminal number (UNIX system)

widcs wide_char_size Yn Character step size when in double wide mode

wsl width_status_line ws Number of columns in status line

xmc magic_cookie_glitch sg Number of blank characters left
by smso or rmso

Strings ordered by variable name

Cap-	Variable	Termcap	Description
name		code
bufsz	buffer_capacity	Ya	Number of bytes buffered before printing
colors	max_colors	Co	Maximum number of colors on the screen
cols	columns	co	Number of columns in a line
cps	print_rate	Ym	Average print rate in characters per second
it	init_tabs	it	Tabs initially every # spaces
lh	label_height	lh	Number of rows in each label
lines	lines	li	Number of lines on a screen or a page
lm	lines_of_memory	lm	Lines of memory if > lines; 0 means varies
lw	label_width	lw	Number of columns in each label
maddr	max_micro_address	Yd	Maximum value in micro_..._address
mcs	micro_col_size	Yf	Character step size when in micro mode
mjump	max_micro_jump	Ye	Maximum value in parm_..._micro
mls	micro_line_size	Yg	Line step size when in micro mode
ncv	no_color_video	NC	Video attributes that can't be used with colors
nlab	num_labels	Nl	Number of labels on screen (start at 1)
npins	number_of_pins	Yh	Number of pins in print-head
orc	output_res_char	Yi	Horizontal resolution in units per character
orhi	output_res_horz_inch	Yk	Horizontal resolution in units per inch
orl	output_res_line	Yj	Vertical resolution in units per line
orvi	output_res_vert_inch	Yl	Vertical resolution in units per inch
pairs	max_pairs	pa	Maximum number of color-pairs on the screen
pb	padding_baud_rate	pb	Lowest baud rate where padding needed
spinh	dot_horz_spacing	Yc	Spacing of dots horizontally in dots per inch
spinv	dot_vert_spacing	Yb	Spacing of pins vertically in pins per inch
vt	virtual_terminal	vt	Virtual terminal number (UNIX system)
widcs	wide_char_size	Yn	Character step size when in double wide mode
wsl	width_status_line	ws	Number of columns in status line
xmc	magic_cookie_glitch	sg	Number of blank characters left by smso or rmso

Cap- Variable Termcap Description

name code

acsc acs_chars ac Graphic charset pairs aAbBcC - def=vt100

bel bell bl Audible signal (bell)

blink enter_blink_mode mb Turn on blinking

bold enter_bold_mode md Turn on bold (extra bright) mode

cbt back_tab bt Back tab

chr change_res_horz ZC Change horizontal resolution ()

civis cursor_invisible vi Make cursor invisible

clear clear_screen cl Clear screen and home cursor ()

cmdch command_character CC Terminal settable cmd character in prototype

cnorm cursor_normal ve Make cursor appear normal (undo vs/vi)

cpi change_char_pitch ZA Change number of characters per inch ()

cr carriage_return cr Carriage return ()

csnm char_set_names Zy List of character set names

csr change_scroll_region cs Change to lines #1 through #2 (vt100) (G)

cub parm_left_cursor LE Move cursor left #1 spaces (G)

cub1 cursor_left le Move left one space.

cud parm_down_cursor DO Move down #1 lines. (G)

cuf parm_right_cursor RI Move right #1 spaces. (G)

cuf1 cursor_right nd Non-destructive space (cursor or carriage right)

cup cursor_address cm Move to row #1 col #2 (G)

cuu parm_up_cursor UP Move cursor up #1 lines. (G)

cvr change_res_vert ZD Change vertical resolution ()

cvvis cursor_visible vs Make cursor very visible

dch parm_dch DC Delete #1 chars (G)

dch1 delete_character dc Delete character ()

defc define_char ZE Define a character in a character set

dim enter_dim_mode mh Turn on half-bright mode

dl delete_line dl1 Delete line ()

dl parm_delete_line DL Delete #1 lines (G)

do cursor_down do Down one line

docr these_cause_cr Zw Printing any of these chars causes cr

dsl dis_status_line ds Disable status line

ech erase_chars ec Erase #1 characters (G)

ed clr_eos cd Clear to end of display ()

el clr_eol ce Clear to end of line

el1 clr_bol cb Clear to beginning of line, inclusive

enacs ena_acs eA Enable alternate character set

ff form_feed ff Hardcopy terminal page eject ()

flash flash_screen vb Visible bell (may not move cursor)

fln label_format Lf Label format

fsl from_status_line fs Return from status line

Cap-	Variable	Termcap	Description
name		code
acsc	acs_chars	ac	Graphic charset pairs aAbBcC - def=vt100
bel	bell	bl	Audible signal (bell)
blink	enter_blink_mode	mb	Turn on blinking
bold	enter_bold_mode	md	Turn on bold (extra bright) mode
cbt	back_tab	bt	Back tab
chr	change_res_horz	ZC	Change horizontal resolution ()
civis	cursor_invisible	vi	Make cursor invisible
clear	clear_screen	cl	Clear screen and home cursor ()
cmdch	command_character	CC	Terminal settable cmd character in prototype
cnorm	cursor_normal	ve	Make cursor appear normal (undo vs/vi)
cpi	change_char_pitch	ZA	Change number of characters per inch ()
cr	carriage_return	cr	Carriage return ()
csnm	char_set_names	Zy	List of character set names
csr	change_scroll_region	cs	Change to lines #1 through #2 (vt100) (G)
cub	parm_left_cursor	LE	Move cursor left #1 spaces (G)
cub1	cursor_left	le	Move left one space.
cud	parm_down_cursor	DO	Move down #1 lines. (G)
cuf	parm_right_cursor	RI	Move right #1 spaces. (G)
cuf1	cursor_right	nd	Non-destructive space (cursor or carriage right)
cup	cursor_address	cm	Move to row #1 col #2 (G)
cuu	parm_up_cursor	UP	Move cursor up #1 lines. (G)
cvr	change_res_vert	ZD	Change vertical resolution ()
cvvis	cursor_visible	vs	Make cursor very visible
dch	parm_dch	DC	Delete #1 chars (G)
dch1	delete_character	dc	Delete character ()
defc	define_char	ZE	Define a character in a character set
dim	enter_dim_mode	mh	Turn on half-bright mode
dl	delete_line	dl1	Delete line ()
dl	parm_delete_line	DL	Delete #1 lines (G)
do	cursor_down	do	Down one line
docr	these_cause_cr	Zw	Printing any of these chars causes cr
dsl	dis_status_line	ds	Disable status line
ech	erase_chars	ec	Erase #1 characters (G)
ed	clr_eos	cd	Clear to end of display ()
el	clr_eol	ce	Clear to end of line
el1	clr_bol	cb	Clear to beginning of line, inclusive
enacs	ena_acs	eA	Enable alternate character set
ff	form_feed	ff	Hardcopy terminal page eject ()
flash	flash_screen	vb	Visible bell (may not move cursor)
fln	label_format	Lf	Label format
fsl	from_status_line	fs	Return from status line

hd down_half_line hd Half-line down (forward 1/2 linefeed)

home cursor_home ho Home cursor (if no cup)

hook flash_hook fh Flash the switch hook

hpa column_address ch Horizontal position absolute (G)

ht tab ta Tab to next 8-space hardware tab stop

hts set_tab st Set a tab in all rows, current column

hu up_half_line hu Half-line up (reverse 1/2 linefeed)

hup hangup HU Hang-up phone

ich parm_ich IC Insert #1 blank chars (G)

ich1 insert_character ic Insert character

if init_file if Name of initialization file

il parm_insert_line AL Add #1 new blank lines (G)

il1 insert_line al Add new blank line ()

ind scroll_forward sf Scroll text up

indn parm_index SF Scroll forward #1 lines. (G)

initc initialize_color Ic Initialize the definition of color

initp initialize_pair Ip Initialize color-pair

invis enter_secure_mode mk Turn on blank mode (characters invisible)

ip insert_padding ip Insert pad after character inserted ()

iprog init_prog iP Path name of program for initialization

is1 init_1string i1 Terminal or printer initialization string

is2 init_2string is Terminal or printer initialization string

is3 init_3string i3 Terminal or printer initialization string

kBEG key_sbeg &9 KEY_SBEG, 0572, sent by shifted beginning key

kCAN key_scancel &0 KEY_SCANCEL, 0573, sent by shifted cancel key

kCMD key_scommand 1 KEY_SCOMMAND, 0574, sent by
shifted command key

kCPY key_scopy 2 KEY_SCOPY, 0575, sent by shifted copy key

kCRT key_screate 3 KEY_SCREATE, 0576, sent by shifted create key

kDC key_sdc 4 KEY_SDC, 0577, sent by shifted delete-char key

kDL key_sdl 5 KEY_SDL, 0600, sent by shifted delete-line key

kEND key_send 7 KEY_SEND, 0602, sent by shifted end key

kEOL key_seol 8 KEY_SEOL, 0603, sent by shifted clear-line key

kEXT key_sexit 9 KEY_SEXIT, 0604, sent by shifted exit key

kFND key_sfind 0 KEY_SFIND, 0605, sent by shifted find key

kHLP key_shelp #1 KEY_SHELP, 0606, sent by shifted help key

kHOM key_shome #2 KEY_SHOME, 0607, sent by shifted home key

kIC key_sic #3 KEY_SIC, 0610, sent by shifted input key

kLFT key_sleft #4 KEY_SLEFT, 0611, sent by shifted left-arrow key

kMOV key_smove b KEY_SMOVE, 0613, sent by shifted move key

kMSG key_smessage %a KEY_SMESSAGE, 0612, sent by
shifted message key

kNXT key_snext %c KEY_SNEXT, 0614, sent by shifted next key

kOPT key_soptions %d KEY_SOPTIONS, 0615, sent by
shifted options key

kPRT key_sprint %f KEY_SPRINT, 0617, sent by shifted print key

kPRV key_sprevious %e KEY_SPREVIOUS, 0616, sent by shifted prev key

kRDO key_sredo %g KEY_SREDO, 0620, sent by shifted redo key

kRES key_srsume %j KEY_SRSUME, 0623, sent by shifted resume key

kRIT key_sright %i KEY_SRIGHT, 0622, sent by shifted right-arrow key

kRPL key_sreplace %h KEY_SREPLACE, 0621, sent by shifted replace key

kSAV key_ssave !1 KEY_SSAVE, 0624, sent by shifted save key

kSPD key_ssuspend !2 KEY_SSUSPEND, 0625, sent by shifted suspend key

kUND key_sundo !3 KEY_SUNDO, 0626, sent by shifted undo key

ka1 key_a1 K1 KEY_A1, 0534, upper left of keypad

ka3 key_a3 K3 KEY_A3, 0535, upper right of keypad

kb2 key_b2 K2 KEY_B2, 0536, center of keypad

kbeg key_beg @1 KEY_BEG, 0542, sent by beg(inning) key

kbs key_backspace kb KEY_BACKSPACE, 0407, sent by backspace key

kc1 key_c1 K4 KEY_C1, 0537, lower left of keypad

kc3 key_c3 K5 KEY_C3, 0540, lower right of keypad

kcan key_cancel @2 KEY_CANCEL, 0543, sent by cancel key

kcbt key_btab kB KEY_BTAB, 0541, sent by back-tab key

kclo key_close @3 KEY_CLOSE, 0544, sent by close key

kclr key_clear kC KEY_CLEAR, 0515, sent by clear-screen or erase key

kcmd key_command @4 KEY_COMMAND, 0545, sent by cmd
(command) key

kcpy key_copy @5 KEY_COPY, 0546, sent by copy key

kcrt key_create @6 KEY_CREATE, 0547, sent by create key

kctab key_ctab kt KEY_CTAB, 0525, sent by clear-tab key

kcub1 key_left kl KEY_LEFT, 0404, sent by terminal left-arrow key

kcud1 key_down kd KEY_DOWN, 0402, sent by terminal
down-arrow key

kcuf1 key_right kr KEY_RIGHT, 0405, sent by terminal right-arrow key

kcuu1 key_up ku KEY_UP, 0403, sent by terminal up-arrow key

kdch1 key_dc kD KEY_DC, 0512, sent by delete-character key

kdl1 key_dl kL KEY_DL, 0510, sent by delete-line key

ked key_eos ked KEY_EOS, 0516, sent by clear-to-end-of-screen key

kel key_eol kE KEY_EOL, 0517, sent by clear-to-end-of-line key

kend key_end @7 KEY_END, 0550, sent by end key

kent key_enter @8 KEY_ENTER, 0527, sent by enter/send key

kext key_exit @9 KEY_EXIT, 0551, sent by exit key

kf0 key_f0 k0 KEY_F(0), 0410, sent by function key f0

kf1 key_f1 k1 KEY_F(C), 0411, sent by function key f1

kf10 key_f10 k; KEY_F(ADM), 0422, sent by function key f10

kf11 key_f11 F1 KEY_F(ADM), 0423, sent by function key f11

kf12 key_f12 F2 KEY_F(ADM), 0424, sent by function key f12

kf13 key_f13 F3 KEY_F(ADM), 0425, sent by function key f13

kf14 key_f14 F4 KEY_F(ADM), 0426, sent by function key f14

kf15 key_f15 F5 KEY_F(ADM), 0427, sent by function key f15

kf16 key_f16 F6 KEY_F(ADM), 0430, sent by function key f16

kf17 key_f17 F7 KEY_F(ADM), 0431, sent by function key f17

kf18 key_f18 F8 KEY_F(ADM), 0432, sent by function key f18

kf19 key_f19 F9 KEY_F(ADM), 0433, sent by function key f19

kf2 key_f2 k2 KEY_F(S), 0412, sent by function key f2

kf20 key_f20 FA KEY_F(20), 0434, sent by function key f20

kf21 key_f21 FB KEY_F(21), 0435, sent by function key f21

kf22 key_f22 FC KEY_F(22), 0436, sent by function key f22

kf23 key_f23 FD KEY_F(23), 0437, sent by function key f23

kf24 key_f24 FE KEY_F(24), 0440, sent by function key f24

kf25 key_f25 FF KEY_F(25), 0441, sent by function key f25

kf26 key_f26 FG KEY_F(26), 0442, sent by function key f26

kf27 key_f27 FH KEY_F(27), 0443, sent by function key f27

kf28 key_f28 FI KEY_F(28), 0444, sent by function key f28

kf29 key_f29 FJ KEY_F(29), 0445, sent by function key f29

kf3 key_f3 k3 KEY_F(S), 0413, sent by function key f3

kf30 key_f30 FK KEY_F(S), 0446, sent by function key f30

kf31 key_f31 FL KEY_F(S), 0447, sent by function key f31

kf32 key_f32 FM KEY_F(S), 0450, sent by function key f32

kf33 key_f33 FN KEY_F(ADM), 0451, sent by function key f33

kf34 key_f34 FO KEY_F(S), 0452, sent by function key f34

kf35 key_f35 FP KEY_F(S), 0453, sent by function key f35

kf36 key_f36 FQ KEY_F(S), 0454, sent by function key f36

kf37 key_f37 FR KEY_F(S), 0455, sent by function key f37

kf38 key_f38 FS KEY_F(S), 0456, sent by function key f38

kf39 key_f39 FT KEY_F(S), 0457, sent by function key f39

kf4 key_f4 k4 KEY_F(F), 0414, sent by function key f4

kf40 key_f40 FU KEY_F(40), 0460, sent by function key f40

kf41 key_f41 FV KEY_F(41), 0461, sent by function key f41

kf42 key_f42 FW KEY_F(42), 0462, sent by function key f42

kf43 key_f43 FX KEY_F(43), 0463, sent by function key f43

kf44 key_f44 FY KEY_F(44), 0464, sent by function key f44

kf45 key_f45 FZ KEY_F(45), 0465, sent by function key f45

kf46 key_f46 Fa KEY_F(46), 0466, sent by function key f46

kf47 key_f47 Fb KEY_F(47), 0467, sent by function key f47

kf48 key_f48 Fc KEY_F(48), 0470, sent by function key f48

kf5 key_f5 k5 KEY_F(M), 0415, sent by function key f5

kf50 key_f50 Fe KEY_F(50), 0472, sent by function key f50

kf51 key_f51 Ff KEY_F(51), 0473, sent by function key f51

kf52 key_f52 Fg KEY_F(52), 0474, sent by function key f52

kf53 key_f53 Fh KEY_F(53), 0475, sent by function key f53

kf54 key_f54 Fi KEY_F(54), 0476, sent by function key f54

kf55 key_f55 Fj KEY_F(55), 0477, sent by function key f55

kf56 key_f56 Fk KEY_F(56), 0500, sent by function key f56

kf57 key_f57 Fl KEY_F(57), 0501, sent by function key f57

kf58 key_f58 Fm KEY_F(58), 0502, sent by function key f58

kf59 key_f59 Fn KEY_F(59), 0503, sent by function key f59

kf6 key_f6 k6 KEY_F(6), 0416, sent by function key f6

kf60 key_f60 Fo KEY_F(60), 0504, sent by function key f60

kf61 key_f61 Fp KEY_F(61), 0505, sent by function key f61

kf62 key_f62 Fq KEY_F(62), 0506, sent by function key f62

kf63 key_f63 Fr KEY_F(63), 0507, sent by function key f63

kf7 key_f7 k7 KEY_F(7), 0417, sent by function key f7

Kf8 key_f8 k8 KEY_F(8), 0420, sent by function key f8

kf9 key_f9 k9 KEY_F(9), 0421, sent by function key f9

kfnd key_find @0 KEY_FIND, 0552, sent by find key

khlp key_help %1 KEY_HELP, 0553, sent by help key

khome key_home kh KEY_HOME, 0406, sent by home key

khts key_stab kT KEY_STAB, 0524, sent by set-tab key

kich1 key_ic kI KEY_IC, 0513, sent by ins-char/enter ins-mode key

kil1 key_il kA KEY_IL, 0511, sent by insert-line key

kind key_sf kF KEY_SF, 0520, sent by scroll-forward/down key

kll key_ll kH KEY_LL, 0533, sent by home-down key

kmov key_move %4 KEY_MOVE, 0556, sent by move key

kmrk key_mark %2 KEY_MARK, 0554, sent by mark key

kmsg key_message %3 KEY_MESSAGE, 0555, sent by message key

knp key_npage kN KEY_NPAGE, 0522, sent by next-page key

knxt key_next %5 KEY_NEXT, 0557, sent by next-object key

kopn key_open %6 KEY_OPEN, 0560, sent by open key

kopt key_options %7 KEY_OPTIONS, 0561, sent by options key

kpp key_ppage kP KEY_PPAGE, 0523, sent by previous-page key

kprt key_print %9 KEY_PRINT, 0532, sent by print or copy key

kprv key_previous %8 KEY_PREVIOUS, 0562, sent by previous-object key

krdo key_redo %0 KEY_REDO, 0563, sent by redo key

kref key_reference &1 KEY_REFERENCE, 0564, sent by ref(erence) key

kres key_resume &5 KEY_RESUME, 0570, sent by resume key

krfr key_refresh &2 KEY_REFRESH, 0565, sent by refresh key

kri key_sr kR KEY_SR, 0521, sent by scroll-backward/up key

krmir key_eic kM KEY_EIC, 0514, sent by rmir or smir in insert mode

krpl key_replace &3 KEY_REPLACE, 0566, sent by replace key

krst key_restart &4 KEY_RESTART, 0567, sent by restart key

ksav key_save &6 KEY_SAVE, 0571, sent by save key

kslt key_select 6 KEY_SELECT, 0601, sent by select key

kspd key_suspend &7 KEY_SUSPEND, 0627, sent by suspend key

ktbc key_catab ka KEY_CATAB, 0526, sent by clear-all-tabs key

kund key_undo &8 KEY_UNDO, 0630, sent by undo key

lf0 lab_f0 l0 Labels on function key f0 if not f0

lf1 lab_f1 l1 Labels on function key f1 if not f1

lf10 lab_f10 la Labels on function key f10 if not f10

lf2 lab_f2 l2 Labels on function key f2 if not f2

lf3 lab_f3 l3 Labels on function key f3 if not f3

lf4 lab_f4 l4 Labels on function key f4 if not f4

lf5 lab_f5 l5 Labels on function key f5 if not f5

lf6 lab_f6 l6 Labels on function key f6 if not f6

lf7 lab_f7 l7 Labels on function key f7 if not f7

lf8 lab_f8 l8 Labels on function key f8 if not f8

lf9 lab_f9 l9 Labels on function key f9 if not f9

ll cursor_to_ll ll Last line, first column (if no cup)

lpi change_line_pitch ZB Change number of lines per inch

ma max_attributes ma Maximum combined video attributes
terminal can display

mc0 print_screen ps Print contents of the screen

mc4 prtr_off pf Turn off the printer

mc5 prtr_on po Turn on the printer

mc5p prtr_non pO Turn on the printer for #1 bytes

mcub parm_left_micro Zg Like parm_left_cursor for micro adjust.

mcub1 micro_left Za Like cursor_left for micro adjustment

mcud parm_down_micro Zf Like parm_down_cursor for micro adjust. (G)

mcud1 micro_down ZZ Like cursor_down for micro adjustment

mcuf parm_right_micro Zh Like parm_right_cursor for micro adjust.

mcuf1 micro_right Zb Like cursor_right for micro adjustment

mcuu parm_up_micro Zi Like parm_up_cursor for micro adjust.

mcuu1 micro_up Zd Like cursor_up for micro adjustment

mgc clear_margins MC Clear all margins (top, bottom, and sides)

mhpa micro_column_address ZY Like column_address for micro adjustment

mrcup cursor_mem_address CM Memory relative cursor addressing (G)

mvpa micro_row_address Zc Like row_address for micro adjustment

ndscr non_dest_scroll_region ND Scrolling region is non-destructive

nel newline nw Newline (behaves like cr followed by lf)

oc orig_colors oc Set all color(-pair)s to the original ones

op orig_pair op Set default color-pair to the original one

pad pad_char pc Pad character (rather than null)

pause fixed_pause PA Pause for 2-3 seconds

pfkey pkey_key pk Prog funct key #1 to type string #2

pfloc pkey_local pl Prog funct key #1 to execute string #2

pfx pkey_xmit px Prog funct key #1 to xmit string #2

pln plab_norm pn Prog label #1 to show string #2

porder order_of_pins Ze Matches software bits to print-head pins

prot enter_protected_mode mp Turn on protected mode

pulse pulse PU Select pulse dialing

qdial quick_dial QD Dial phone number #1, without progress detection

rbim stop_bit_image Zs End printing bit image graphics

rc restore_cursor rc Restore cursor to position of last sc

rcsd stop_char_set_def Zt End definition of a character set

rep repeat_char rp Repeat char #1 #2 times (G)

rev enter_reverse_mode mr Turn on reverse video mode

rf reset_file rf Name of file containing reset string

rfi req_for_input RF Send next input char (for ptys)

ri scroll_reverse sr Scroll text down

rin parm_rindex SR Scroll backward #1 lines. (G)

ritm exit_italics_mode ZR Disable italics

rlm exit_leftward_mode ZS Enable rightward (normal) carriage motion

rmacs exit_alt_charset_mode ae End alternate character set

rmam exit_am_mode RA Turn off automatic margins

rmclk remove_clock RC Remove time-of-day clock

rmcup exit_ca_mode te String to end programs that use cup

rmdc exit_delete_mode ed End delete mode

rmicm exit_micro_mode ZT Disable micro motion capabilities

rmir exit_insert_mode ei End insert mode

rmkx keypad_local ke Out of ``keypad-transmit'' mode

rmln label_off LF Turn off soft labels

rmm meta_off mo Turn off "meta mode"

rmp char_padding rP Like ip but when in replace mode

rmso exit_standout_mode se End standout mode

rmul exit_underline_mode ue End underscore mode

rmxon exit_xon_mode RX Turn off xon/xoff handshaking

rs1 reset_1string r1 Reset terminal completely to sane modes

rs2 reset_2string r2 Reset terminal completely to sane modes

rs3 reset_3string r3 Reset terminal completely to sane modes

rshm exit_shadow_mode ZU Disable shadow printing

rsubm exit_subscript_mode ZV Disable subscript printing

rsupm exit_superscript_mode ZW Disable superscript printing

rum exit_upward_mode ZX Enable downward (normal) carriage motion

rwidm exit_doublewide_mode ZQ Disable double wide printing

sbim start_bit_image Zq Start printing bit image graphics

sc save_cursor sc Save cursor position

sclk set_clock SC Set time-of-day clock

scp set_color_pair sp Set current color-pair

scs select_char_set Zj Select character set

scsd start_char_set_def Zr Start definition of a character set

sdrfq enter_draft_quality ZG Set draft quality print

setb set_background Sb Set current background color

setf set_foreground Sf Set current foreground color

sgr set_attributes sa Define the video attributes #1-#9 (G)

sgr0 exit_attribute_mode me Turn off all attributes

sitm enter_italics_mode ZH Enable italics

slm enter_leftward_mode ZI Enable leftward carriage motion

smacs enter_alt_charset_mode as Start alternate character set

smam enter_am_mode SA Turn on automatic margins

smcup enter_ca_mode ti String to begin programs that use cup

smdc enter_delete_mode dm Delete mode (enter)

smgb set_bottom_margin Zk Set bottom margin at current line

smgbp set_bottom_margin_parm Zl Set bottom margin at line #1

smgl set_left_margin ML Set left margin at current line

smglp set_left_margin_parm Zm Set left margin at column #1

smgr set_right_margin MR Set right margin at current column

smgrp set_right_margin_parm Zn Set right margin at column #1

smgt set_top_margin Zo Set top margin at current line

smgtp set_top_margin_parm Zp Set top margin at line #1

smicm enter_micro_mode ZJ Enable micro motion capabilities

smir enter_insert_mode im Insert mode (enter)

smkx keypad_xmit ks Put terminal in ``keypad-transmit'' mode

smln label_on LO Turn on soft labels

smm meta_on mm Turn on ``meta mode'' (8th bit)

smso enter_standout_mode so Begin standout mode

smxon enter_xon_mode SX Turn on xon/xoff handshaking

snlq enter_near_letter_quality ZK Set near-letter quality print

snrmq enter_normal_quality ZL Set normal quality print

sshm enter_shadow_mode ZM Enable shadow printing

ssubm enter_subscript_mode ZN Enable subscript printing

ssupm enter_superscript_mode ZO Enable superscript printing

subcs subscript_characters Zu List of ``subscript-able'' characters

sum enter_upward_mode ZP Enable upward carriage motion

supcs superscript_characters Zv List of ``superscript-able'' characters

swidm enter_doublewide_mode ZF Enable double wide printing

tbc clear_all_tabs ct Clear all tab stops

tone tone TO Select touch tone dialing

tsl to_status_line ts Go to status line, col #1 (G)

u0 user0 u0 User string 0

u1 user1 u1 User string 1

u2 user2 u2 User string 2

u3 user3 u3 User string 3

u4 user4 u4 User string 4

u5 user5 u5 User string 5

u6 user6 u6 User string 6

u7 user7 u7 User string 7

u8 user8 u8 User string 8

u9 user9 u9 User string 9

uc underline_char uc Underscore one char and move past it

up cursor_up cuu1 Upline (cursor up)

vpa row_address cv Vertical position absolute (G)

wait wait_tone WA Wait for dial tone

wind set_window wi Current window is lines #1-#2 cols #3-#4 (G)

wingo goto_window WG Got to window #1

wnum maximum_windows MW Maximum number of definable windows

xoffc xoff_character XF X-off character

xonc xon_character XN X-on character

zerom zero_motion Zx No motion for the subsequent character

Sample entry

The following entry for the AT&T 610 terminal is among the more complex entries in the terminfo file.

610 | 610bct | ATT610 | att610 | AT&T 610; 80 column; 98key keyboard
	am, eslok, hs, mir, msgr, xenl, xon,
	cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{ | | }}~~,
	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
	civis=\E[?25l, clear=\E[H\E[J, cnorm=\E[?25h\E[?12l,
	cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\b,
	cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
	cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
	dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
	flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=\t,
	ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
	invis=\E[8m,
	is1=\E[8;0 | \E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0,
	is2=\E[0m^O, is3=\E(B\E)0, kLFT=\E[\s@, kRIT=\E[\sA,
	kbs=\b, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
	kcuf1=\E[C, kcuu1=\E[A, kf1=\EOc, kf10=\ENp,
	kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf2=\EOd,
	kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi,
	kf8=\EOj, kf9=\ENo, khome=\E[H, kind=\E[S, kri=\E[T,
	ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
	pfx=\E[%p1%d;%p2%l%02dq\s\s\sF%p1%1d\s\s\s\s\s
\s\s\s\s\s\s%p2%s,
	pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
	ri=\EM, rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m,
	rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7,
	sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;
%?%p3%p1% | %t;7%;%?%p7%t;8%;m%?%p9%t^N%e^O%;,
	sgr0=\E[m^O, smacs=^N, smir=\E[4h, smln=\E[p,
	smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx,

Types of capabilities in the sample entry

The sample entry shows the formats for the three types of terminfo capabilities listed: Boolean, Numeric, and String. The names of Boolean capabilities are often listed as abbreviations or acronyms, such as am (short for ``automatic margins'') in the sample entry. (``Automatic margins'' is a short description of an automatic return and linefeed when the end of a line is reached.)

Numeric capabilities are followed by the character ``#'' and then the value. Thus, in the sample, cols (which shows the number of columns available on a terminal) gives the value 80 for the AT&T 610. (Values for numeric capabilities may be specified in decimal, octal or hexadecimal, using normal C conventions.)

Finally, string-valued capabilities such as el (clear to end-of-line sequence) are listed by a two- to five-character capname, an ``='', and a string ended by the next occurrence of a comma. A delay in milliseconds may appear anywhere in such a capability, enclosed in $<..> brackets, as in el=\EK$<3>. Padding characters are supplied by tputs(). The delay can be any of the following: a number (5), a number followed by a ``'' (5), a number followed by a ``/'' (5/), or a number followed by both (5/). A ``'' shows that the padding required is proportional to the number of lines affected by the operation, and the amount given is the per-affected-unit padding required. (In the case of insert characters, the factor is still the number of lines affected. This is always 1 unless the terminal has in and the software uses it.) When a ``'' is specified, it is sometimes useful to give a delay of the form 3.5 to specify a delay per unit to tenths of milliseconds. (Only one decimal place is allowed.)

A ``/'' indicates that the padding is mandatory. Absence of a ``/'' is not shown, if the terminal has xon defined. Padding information is advisory and will be used only for cost estimates or when the terminal is in raw mode. Mandatory padding will be transmitted regardless of the setting of xon.

A number of escape sequences are provided in the string valued capabilities for easy encoding of characters there. Both \E and \e map to an ESCAPE character, ^x maps to a control-x for any appropriate x, and the sequences \n, \l, \r, \t, \b, \f, and \s give a newline, linefeed, return, tab, backspace, formfeed, and space, respectively. Other escapes include: \^ for caret (^); \\ for backslash (\); \, for comma (,); \: for colon (:); and \0 for null. (\0 will actually produce \200, which does not terminate a string but behaves as a null character on most terminals.) Finally, characters may be given as three octal digits after a backslash (for example, \123).

Sometimes individual capabilities must be commented out. To do this, put a period before the capability name. For example, see the second ind in the example above. Note that capabilities are defined in a left-to-right order and, therefore, a prior definition will override a later definition.

Preparing descriptions

The most effective way to prepare a terminal description is by imitating the description of a similar terminal in terminfo and building up a description gradually, using partial descriptions with vi to check that they are correct. Be aware that a very unusual terminal may expose deficiencies in the ability of the terminfo file to describe it or the inability of vi to work with that terminal. To test a new terminal description, set the environment variable TERMINFO to a pathname of a directory containing the compiled description you are working on: programs will then look there rather than in /usr/lib/terminfo. To get the padding for insert-line correct (if the terminal manufacturer did not document it) a severe test is to comment out xon, edit a large file at 9600 baud with vi, delete 16 or so lines from the middle of the screen, then hit the ``u'' key several times quickly. If the display is corrupted, more padding is usually needed. A similar test can be used for insert-character.

Basic capabilities

The number of columns on each line for the terminal is given by the cols numeric capability. If the terminal has a screen, then the number of lines on the screen is given by the lines capability. If the terminal can clear its screen, leaving the cursor in the home position, then this is given by the clear string capability. If the terminal overstrikes (rather than clearing a position when a character is struck over) then it should have the os capability. If the terminal is a printing terminal, with no soft copy unit, give it both hc and os. (os applies to storage scope terminals, such as the Tektronix 4010 series, as well as hard-copy and APL terminals.) If there is a code to move the cursor to the left edge of the current row, give this as cr. (Normally this will be carriage return, control M.) If there is a code to produce an audible signal (such as a bell or a beep), specify it as bel. If the terminal uses the xon-xoff flow-control protocol, like most terminals, specify xon.

If there is a code to move the cursor one position to the left (such as backspace), that capability should be given as cub1. Similarly, codes to move to the right, up, and down should be given as cuf1, cuu1, and cud1. These local cursor motions should not alter the text they pass over; for example, you would not normally use ``cuf1=\s'' because the space would erase the character moved over.

A very important point here is that the local cursor motions encoded in terminfo are undefined at the left and top edges of a screen terminal. Programs should never attempt to backspace around the left edge, unless bw is given, and should never attempt to go up locally off the top. In order to scroll text up, a program will go to the bottom left corner of the screen and send the ind (index) string.

To scroll text down, a program goes to the top left corner of the screen and sends the ri (reverse index) string. The strings ind and ri are undefined when not on their respective corners of the screen.

Parameterized versions of the scrolling sequences are indn and rin which have the same semantics as ind and ri except that they take one parameter, and scroll that many lines. They are also undefined except at the appropriate edge of the screen.

If the terminal wraps around to the beginning of the next line when it reaches the right margin, then it should have the am capability. The am capability tells whether the cursor sticks at the right edge of the screen when text is output, but this does not necessarily apply to a cuf1 from the last column. The only local motion which is defined from the left edge is if bw is given: then a cub1 from the left edge will move to the right edge of the previous row. If bw is not given, the effect is undefined. This is useful for drawing a box around the edge of the screen, for example. If the terminal has switch selectable automatic margins, the terminfo file usually assumes that this is on; that is, am. If the terminal has a command which moves to the first column of the next line, that command can be given as nel (newline). It does not matter if the command clears the remainder of the current line, so if the terminal has no cr and lf it may still be possible to craft a working nel out of one or both of them.

These capabilities suffice to describe hardcopy and screen terminals. Thus the model 33 teleprinter is described as:

   hc, os, xon
      cols#72,
      bel=^G, cr=\r, cud1=\n, ind=\n,

while the Lear Siegler ADM-3 is described as:

      adm3|lsi adm3,
      am, bel=^G, clear=^Z, cols#80, cr=^M, cub1=^H,
      cud1=^J, ind=^J, lines#24,

Parameterized strings

Cursor addressing and other strings requiring parameters in the terminal are described by a parameterized string capability, with printf(S) -like escapes (%x) in it. For example, to address the cursor, the cup capability is given, using two parameters: the row and column to address to. (Rows and columns are numbered from zero and refer to the physical screen visible to the user, not to any unseen memory.) If the terminal has memory-relative cursor addressing, that can be indicated by mrcup.

The parameter mechanism uses a stack and special % codes to manipulate it in the manner of a Reverse Polish Notation (postfix) calculator. Typically, a sequence will push one of the parameters onto the stack and then print it in some format. Often more complex operations are necessary. Binary operations are in postfix form with the operands in the usual order. That is, to get x-5 one would use %gx%{5}%-.

The % encodings have the following meanings:

%% outputs `%'
%[[:]flags][width[.precision]][doxXs]
as in printf, flags are [-+#] and space
%c print pop() gives %c

%p[1-9] push i[th] parm
%P[a-z] set variable [a-z] to pop()
%g[a-z] get variable [a-z] and push it
%'c' push char constant c
%{nn} push decimal constant nn
%l push strlen(pop())

%+ %- % %/ %m
arithmetic (%m is mod): push(pop() op pop())
%& %| %^ bit operations: push(pop() op pop())
%= %> %< logical operations: push(pop() op pop())
%A %O logical operations: and, or
%! %~ unary operations: push(op pop())
%i (for ANSI terminals)
add 1 to first parm, if one parm present,
or first two parms, if more than one parm present

%? expr %t thenpart %e elsepart %;
if-then-else, %e elsepart is optional;
else-if's are possible ala Algol 68:
%? c[1] %t b[1] %e c[2] %t b[2] %e c[3] %t b[3] %e c[4] %t b[4] %e b[5]%;

c[i] are conditions, b[i] are bodies.

If the ``-'' flag is used with ``%[doxXs]'', then a colon (:) must be placed between the ``%'' and the ``-'' to differentiate the flag from the binary ``%-'' operator, for example, ``%:-16.16s''.

Consider the Hewlett-Packard 2645, which, to get to row 3 and column 12, needs to be sent \E&a12c03Y padded for 6 milliseconds. Note that the order of the rows and columns is inverted here, and that the row and column are zero-padded as two digits. Thus its cup capability is ``cup=\E&a%p2%2.2dc%p1%2.2dY$<6>''.

The Micro-Term ACT-IV needs the current row and column sent preceded by a ^T, with the row and column simply encoded in binary, ``cup=^T%p1%c%p2%c''. Terminals which use ``%c'' need to be able to backspace the cursor (cub1), and to move the cursor up one line on the screen (cuu1). This is necessary because it is not always safe to transmit \n, ^D, and \r, as the system may change or discard them. (The library routines dealing with terminfo set tty modes so that tabs are never expanded, so \t is safe to send. This turns out to be essential for the Ann Arbor 4080.)

A final example is the LSI ADM-3a, which uses row and column offset by a blank character, thus ``cup=\E=%p1%'\s'%+%c%p2%'\s'%+%c''. After sending ``\E='', this pushes the first parameter, pushes the ASCII value for a space (S), adds them (pushing the sum on the stack in place of the two previous values), and outputs that value as a character. Then the same is done for the second parameter. More complex arithmetic is possible using the stack.

Cursor motions

If the terminal has a fast way to home the cursor (to very upper left corner of screen) then this can be given as home; similarly a fast way of getting to the lower left-hand corner can be given as ll; this may involve going up with cuu1 from the home position, but a program should never do this itself (unless ll does) because it can make no assumption about the effect of moving up from the home position. Note that the home position is the same as addressing to (0,0): to the top left corner of the screen, not of memory. (Thus, the \EH sequence on Hewlett-Packard terminals cannot be used for home without losing some of the other features on the terminal.)

If the terminal has row or column absolute-cursor addressing, these can be given as single parameter capabilities hpa (horizontal position absolute) and vpa (vertical position absolute). Sometimes these are shorter than the more general two-parameter sequence (as with the Hewlett-Packard 2645) and can be used in preference to cup. If there are parameterized local motions (for example, move n spaces to the right) these can be given as cud, cub, cuf, and cuu with a single parameter indicating how many spaces to move. These are primarily useful if the terminal does not have cup, such as the Tektronix 4025.

Area clears

If the terminal can clear from the current position to the end of the line, leaving the cursor where it is, this should be given as el. If the terminal can clear from the beginning of the line to the current position inclusive, leaving the cursor where it is, this should be given as el1. If the terminal can clear from the current position to the end of the display, then this should be given as ed. ed is only defined from the first column of a line. (Thus, it can be simulated by a request to delete a large number of lines, if a true ed is not available.)

Insert/delete line

If the terminal can open a new blank line before the line where the cursor is, this should be given as il1; this is done only from the first position of a line. The cursor must then appear on the newly blank line. If the terminal can delete the line which the cursor is on, then this should be given as dl1; this is done only from the first position on the line to be deleted. Versions of il1 and dl1 which take a single parameter and insert or delete that many lines can be given as il and dl.

If the terminal has a settable destructive scrolling region (like the VT100) the command to set this can be described with the csr capability, which takes two parameters: the top and bottom lines of the scrolling region. The cursor position is, unfortunately, undefined after using this command. It is possible to get the effect of insert or delete line using this command -- the sc and rc (save and restore cursor) commands are also useful. Inserting lines at the top or bottom of the screen can also be done using ri or ind on many terminals without a true insert/delete line, and is often faster even on terminals with those features.

To determine whether a terminal has destructive scrolling regions or non-destructive scrolling regions, create a scrolling region in the middle of the screen, place data on the bottom line of the scrolling region, move the cursor to the top line of the scrolling region, and do a reverse index (ri) followed by a delete line (dl1) or index (ind). If the data that was originally on the bottom line of the scrolling region was restored into the scrolling region by the dl1 or ind, then the terminal has non-destructive scrolling regions. Otherwise, it has destructive scrolling regions. Do not specify csr if the terminal has non-destructive scrolling regions, unless ind, ri, indn, rin, dl, and dl1 all simulate destructive scrolling.

If the terminal has the ability to define a window as part of memory, which all commands affect, it should be given as the parameterized string wind. The four parameters are the starting and ending lines in memory and the starting and ending columns in memory, in that order.

If the terminal can retain display memory above, then the da capability should be given; if display memory can be retained below, then db should be given. These indicate that deleting a line or scrolling a full screen may bring non-blank lines up from below or that scrolling back with ri may bring down non-blank lines.

Insert/delete character

There are two basic kinds of intelligent terminals with respect to insert/delete character operations which can be described using terminfo. The most common insert/delete character operations affect only the characters on the current line and shift characters off the end of the line rigidly. Other terminals, such as the Concept 100 and the Perkin Elmer Owl, make a distinction between typed and untyped blanks on the screen, shifting upon an insert or delete only to an untyped blank on the screen which is either eliminated, or expanded to two untyped blanks. You can determine the kind of terminal you have by clearing the screen and then typing text separated by cursor motions. Type ``abc def'' using local cursor motions (not spaces) between the abc and the def. Then position the cursor before the abc and put the terminal in insert mode. If typing characters causes the rest of the line to shift rigidly and characters to fall off the end, then your terminal does not distinguish between blanks and untyped positions. If the abc shifts over to the def which then move together around the end of the current line and onto the next as you insert, you have the second type of terminal, and should give the capability in, which stands for ``insert null''. While these are two logically separate attributes (one line versus multiline insert mode, and special treatment of untyped spaces) no terminals whose insert mode cannot be described with the single attribute have been seen.

terminfo can describe both terminals which have an insert mode and terminals which send a simple sequence to open a blank position on the current line. Give as smir the sequence to get into insert mode. Give as rmir the sequence to leave insert mode. Now give as ich1 any sequence needed to be sent just before sending the character to be inserted. Most terminals with a true insert mode will not give ich1; terminals which send a sequence to open a screen position should give it here. (If your terminal has both, insert mode is usually preferable to ich1. Do not give both unless the terminal actually requires both to be used in combination.) If post-insert padding is needed, give this as a number of milliseconds padding in ip (a string option). Any other sequence which may need to be sent after an insert of a single character may also be given in ip. If your terminal needs both to be placed into an `insert mode' and a special code to precede each inserted character, then both smir/rmir and ich1 can be given, and both will be used. The ich capability, with one parameter, n, will insert n blanks.

If padding is necessary between characters typed while not in insert mode, give this as a number of milliseconds padding in rmp.

It is occasionally necessary to move around while in insert mode to delete characters on the same line (for example, if there is a tab after the insertion position). If your terminal allows motion while in insert mode you can give the capability mir to speed up inserting in this case. Omitting mir will affect only speed. Some terminals (notably Datamedia's) must not have mir because of the way their insert mode works.

Finally, you can specify dch1 to delete a single character, dch with one parameter, n, to delete n characters, and delete mode by giving smdc and rmdc to enter and exit delete mode (any mode the terminal needs to be placed in for dch1 to work).

A command to erase n characters (equivalent to outputting n blanks without moving the cursor) can be given as ech with one parameter.

Highlighting, underlining, and visible bells

Your terminal may have one or more kinds of display attributes that allow you to highlight selected characters when they appear on the screen. The following display modes (shown with the names by which they are set) may be available: a blinking screen (blink), bold or extra-bright characters (bold), dim or half-bright characters (dim), blanking or invisible text (invis), protected text (prot), a reverse-video screen (rev), and an alternate character set (smacs to enter this mode and rmacs to exit it). (If a command is necessary before you can enter alternate character set mode, give the sequence in enacs or ``enable alternate-character-set'' mode.) Turning on any of these modes singly may or may not turn off other modes.

If you set any display attributes for highlighting, you will also want to provide the capability for turning them off. To do so, set sgr0.

You should choose one display method as standout mode (see curses(S)) and use it to highlight error messages and other kinds of text to which you want to draw attention. Choose a form of display that provides strong contrast but that is easy on the eyes. (We recommend reverse-video plus half-bright or reverse-video alone.) The sequences to enter and exit standout mode are given as smso and rmso, respectively. If the code to change into or out of standout mode leaves one or even two blank spaces on the screen, as the TVI 912 and Teleray 1061 do, then xmc should be given to tell how many spaces are left.

Codes to begin underlining and end underlining can be given as smul and rmul, respectively. If the terminal has a code to underline the current character and move the cursor one space to the right, such as the Micro-Term MIME, this can be given as uc.

For historical reasons, some programs interpret rmso, rmul to mean ``turn off all attributes'', not just standout and underline, respectively.

If there is a sequence to set arbitrary combinations of modes, this should be given as sgr (set attributes), taking nine parameters. Each parameter is either 0 or non-zero, as the corresponding attribute is on or off. The nine parameters are, in order: standout, underline, reverse, blink, dim, bold, blank, protect, alternate character set. Not all modes need to be supported by sgr; only those for which corresponding separate attribute commands exist should be supported. (See the example at the end of this section.)

Terminals with the ``magic cookie'' glitch (xmc) deposit special ``cookies'' when they receive mode-setting sequences, which affect the display algorithm rather than having extra bits for each character. Some terminals, such as the Hewlett-Packard 2621, automatically leave standout mode when they move to a new line or the cursor is addressed. Programs using standout mode should exit standout mode before moving the cursor or sending a newline, unless the msgr capability, asserting that it is safe to move in standout mode, is present.

If the terminal has a way of flashing the screen to indicate an error quietly (a bell replacement), then this can be given as flash; it must not move the cursor. A good flash can be done by changing the screen into reverse video, pad for 200 ms, then return the screen to normal video.

If the cursor needs to be made more visible than normal when it is not on the bottom line (for example, to make a non-blinking underline into an easier-to-find block or blinking underline) give this sequence as cvvis. The boolean chts should also be given. If there is a way to make the cursor completely invisible, give that as civis. The capability cnorm should be given which undoes the effects of either of these modes.

If the terminal needs to be in a special mode when running a program that uses these capabilities, the codes to enter and exit this mode can be given as smcup and rmcup. This arises, for example, from terminals, such as the Concept, with more than one page of memory. If the terminal has only memory relative cursor addressing and not screen relative cursor addressing, a one screen-sized window must be fixed into the terminal for cursor addressing to work properly. This is also used for the Tektronix 4025, where smcup sets the command character to be the one used by terminfo. If the smcup sequence will not restore the screen after a rmcup sequence is output (to the state prior to outputting rmcup), specify nrrmc.

If your terminal generates underlined characters by using the underline character (with no special codes needed) even though it does not otherwise overstrike characters, then you should give the capability ul. For terminals where a character overstriking another leaves both characters on the screen, give the capability os. If overstrikes are erasable with a blank, then this should be indicated by giving eo.

Example of highlighting: assume that the terminal under question needs the following escape sequences to turn on various modes.

Tparm Attribute Escape sequence

parameter

none \E[0m

p1 standout \E[0;4;7m

p2 underline \E[0;3m

p3 reverse \E[0;4m

p4 blink \E[0;5m

p5 dim \E[0;7m

p6 bold \E[0;3;4m

p7 invis \E[0;8m

protect not available

p9 altcharset ^O (off) ^N(on)

Note that each escape sequence requires a 0 to turn off other modes before turning on its own mode. Also note that, as suggested above, standout is set up to be the combination of reverse and dim. Also, because this terminal has no bold mode, bold is set up as the combination of reverse and underline. In addition, to allow combinations, such as underline+blink, the sequence to use would be \E[0;3;5m. The terminal does not have protect mode, either, but that cannot be simulated in any way, so is ignored. The altcharset mode is different in that it is either ^O or ^N, depending on whether it is off or on. If all modes were to be turned on, the sequence would be \E[0;3;4;5;7;8m^N.

Tparm	Attribute	Escape sequence
parameter
	none	\E[0m
p1	standout	\E[0;4;7m
p2	underline	\E[0;3m
p3	reverse	\E[0;4m
p4	blink	\E[0;5m
p5	dim	\E[0;7m
p6	bold	\E[0;3;4m
p7	invis	\E[0;8m
	protect	not available
p9	altcharset	^O (off) ^N(on)

Now look at when different sequences are output. For example, ;3 is output when either p2 or p6 is true; that is, if either underline or bold modes are turned on. Writing out the above sequences, along with their dependencies, gives the following:

Sequence When to output Terminfo translation

\E[0 always \E[0

;3 if p2 or p6 %?%p2%p6%|%t;3%;

;4 if p1 or p3 or p6 %?%p1%p3%|%p6%|%t;4%;

;5 if p4 %?%p4%t;5%;

;7 if p1 or p5 %?%p1%p5%|%t;7%;

;8 if p7 %?%p7%t;8%;

m always m

^N or ^O if p9 ^N, else ^O %?%p9%t^N%e^O%;

Putting this all together into the sgr sequence gives:

sgr=\E[0%?%p2%p6%|%t;3%;%?%p1%p3%|%p6%|%t;4%;%?%p5%t;5%;

%?%p1%p5%|%t;7%;%?%p7%t;8%;m%?%p9%t^N%e^O%;,

Sequence	When to output	Terminfo translation
\E[0	always	\E[0
;3	if p2 or p6	%?%p2%p6%\|%t;3%;
;4	if p1 or p3 or p6	%?%p1%p3%\|%p6%\|%t;4%;
;5	if p4	%?%p4%t;5%;
;7	if p1 or p5	%?%p1%p5%\|%t;7%;
;8	if p7	%?%p7%t;8%;
m	always	m
^N or ^O	if p9 ^N, else ^O	%?%p9%t^N%e^O%;

Keypad

If the terminal has a keypad that transmits codes when the keys are pressed, this information can be given. Note that it is not possible to handle terminals where the keypad only works in local (this applies, for example, to the unshifted Hewlett-Packard 2621 keys). If the keypad can be set to transmit or not transmit, give these codes as smkx and rmkx. Otherwise the keypad is assumed to transmit.

The codes sent by the left arrow, right arrow, up arrow, down arrow, and home keys can be given as kcub1, kcuf1, kcuu1, kcud1, and khome respectively. If there are function keys such as f0, f1, ..., f63, the codes they send can be given as kf0, kf1, ..., kf63. If the first 11 keys have labels other than the default f0 through f10, the labels can be given as lf0, lf1, ..., lf10. The codes transmitted by certain other special keys can be given: kll (home down), kbs (backspace), ktbc (clear all tabs), kctab (clear the tab stop in this column), kclr (clear screen or erase key), kdch1 (delete character), kdl1 (delete line), krmir (exit insert mode), kel (clear to end of line), ked (clear to end of screen), kich1 (insert character or enter insert mode), kil1 (insert line), knp (next page), kpp (previous page), kind (scroll forward/down), kri (scroll backward/up), khts (set a tab stop in this column). In addition, if the keypad has a 3 by 3 array of keys including the four arrow keys, the other five keys can be given as ka1, ka3, kb2, kc1, and kc3. These keys are useful when the effects of a 3 by 3 directional pad are needed. Further keys are defined above in the capabilities list.

Strings to program function keys can be given as pfkey, pfloc, and pfx. A string to program their soft-screen labels can be given as pln. Each of these strings takes two parameters: the function key number to program (from 0 to 10) and the string to program it with. Function key numbers out of this range may program undefined keys in a terminal-dependent manner. The difference between the capabilities is that pfkey causes pressing the given key to give the same result as the user typing the given string; pfloc causes the string to be executed by the terminal in local mode; and pfx causes the string to be transmitted to the computer. The capabilities nlab, lw, and lh define how many soft labels there are and their width and height. If there are commands to turn the labels on and off, give them in smln and rmln. smln is normally output after one or more pln sequences to make sure that the change becomes visible.

Tabs and initialization

If the terminal has hardware tabs, the command to advance to the next tab stop can be given as ht (usually control I). A ``backtab'' command which moves left to the next tab stop can be given as cbt. By convention, if the teletype modes indicate that tabs are being expanded by the computer rather than being sent to the terminal, programs should not use ht or cbt even if they are present, since the user may not have the tab stops properly set. If the terminal has hardware tabs which are initially set every n spaces when the terminal is powered up, the numeric parameter it is given, showing the number of spaces the tabs are set to. This is normally used by tput init (see tput(C)) to determine whether to set the mode for hardware tab expansion and whether to set the tab stops. If the terminal has tab stops that can be saved in nonvolatile memory, the terminfo description can assume that they are properly set. If there are commands to set and clear tab stops, they can be given as tbc (clear all tab stops) and hts (set a tab stop in the current column of every row).

Other capabilities include: is1, is2, and is3, initialization strings for the terminal; iprog, the path name of a program to be run to initialize the terminal; and if, the name of a file containing long initialization strings. These strings are expected to set the terminal into modes consistent with the rest of the terminfo description. They must be sent to the terminal each time the user logs in and be output in the following order: run the program iprog; output is1; output is2; set the margins using mgc, smgl, and smgr; set the tabs using tbc and hts; print the file if; and finally output is3. This is usually done using the init option of tput; see profile(M).

Most initialization is done with is2. Special terminal modes can be set up without duplicating strings by putting the common sequences in is2 and special cases in is1 and is3. Sequences that do a harder reset from a totally unknown state can be given as rs1, rs2, rf, and rs3, analogous to is1, is2, is3, and if. (The method using files, if and rf, is used for a few terminals, from /usr/lib/tabset/; however, the recommended method is to use the initialization and reset strings.) These strings are output by tput reset, which is used when the terminal gets into a wedged state. Commands are normally placed in rs1, rs2, rs3, and rf only if they produce annoying effects on the screen and are not necessary when logging in.

For example, the command to set a terminal into 80-column mode would normally be part of is2, but on some terminals it causes an annoying glitch on the screen and is not normally needed since the terminal is usually already in 80-column mode.

If a more complex sequence is needed to set the tabs than can be described by using tbc and hts, the sequence can be placed in is2 or if.

Any margin can be cleared with mgc. (For instructions on how to specify commands to set and clear margins, see ``Margins'' under ``Part 2: Printer capabilities'').

Delays

Certain capabilities control padding in the tty(7) driver. These are primarily needed by hard-copy terminals, and are used by tput init to set tty modes appropriately. Delays embedded in the capabilities cr, ind, cub1, ff, and tab can be used to set the appropriate delay bits to be set in the tty driver. If pb (padding baud rate) is given, these values can be ignored at baud rates below the value of pb.

Status lines

If the terminal has an extra ``status line'' that is not normally used by software, this fact can be indicated. If the status line is viewed as an extra line below the bottom line, into which one can cursor address normally (such as the Heathkit h19's 25th line, or the 24th line of a VT100 which is set to a 23-line scrolling region), the capability hs should be given. Special strings that go to a given column of the status line and return from the status line can be given as tsl and fsl. (fsl must leave the cursor position in the same place it was before tsl. If necessary, the sc and rc strings can be included in tsl and fsl to get this effect.) The capability tsl takes one parameter, which is the column number of the status line the cursor is to be moved to.

If escape sequences and other special commands, such as tab, work while in the status line, the flag eslok can be given. A string which turns off the status line (or otherwise erases its contents) should be given as dsl. If the terminal has commands to save and restore the position of the cursor, give them as sc and rc. The status line is normally assumed to be the same width as the rest of the screen, for example, cols. If the status line is a different width (possibly because the terminal does not allow an entire line to be loaded) the width, in columns, can be indicated with the numeric parameter wsl.

Line graphics

If the terminal has a line drawing alternate character set, the mapping of glyph to character would be given in acsc. The definition of this string is based on the alternate character set used in the DEC VT100 terminal, extended slightly with some characters from the AT&T 4410v1 terminal.

Glyph name vt100+

character

arrow pointing right +

arrow pointing left ,

arrow pointing down .

solid square block 0

lantern symbol I

arrow pointing up -

diamond `

checker board (stipple) a

degree symbol f

plus/minus g

board of squares h

lower right corner j

upper right corner k

upper left corner l

lower left corner m

plus n

scan line 1 o

horizontal line q

scan line 9 s

left tee (|-) t

right tee (-|) u

bottom tee ( RIGHT FLOOR ) v

top tee ( LEFT CEILING ) w

vertical line x

bullet ~

The best way to describe a new terminal's line graphics set is to add a third column to the above table with the characters for the new terminal that produce the appropriate glyph when the terminal is in the alternate character set mode. For example,

Glyph name	vt100+
	character
arrow pointing right	+
arrow pointing left	,
arrow pointing down	.
solid square block	0
lantern symbol	I
arrow pointing up	-
diamond	`
checker board (stipple)	a
degree symbol	f
plus/minus	g
board of squares	h
lower right corner	j
upper right corner	k
upper left corner	l
lower left corner	m
plus	n
scan line 1	o
horizontal line	q
scan line 9	s
left tee (\|-)	t
right tee (-\|)	u
bottom tee ()	v
top tee ()	w
vertical line	x
bullet	~

Glyph name vt100+ new tty

character character

upper left corner l R

lower left corner m F

upper right corner k T

lower right corner j G

horizontal line q ,

vertical line x .

Now write down the characters left to right, as in ``acsc=lRmFkTjGq\,x.''.

Glyph name	vt100+	new tty
	character	character
upper left corner	l	R
lower left corner	m	F
upper right corner	k	T
lower right corner	j	G
horizontal line	q	,
vertical line	x	.

In addition, terminfo allows you to define multiple character sets. See ``Alternate character sets'' for details.

Color manipulation

There are two methods of color manipulation: the HP method and the Tektronix method. Most existing color terminals belong to one of these two classes.

The Tektronix method uses a set of N predefined colors (usually 8) from which a user can select ``current'' foreground and background colors. Thus the terminal can support up to N colors mixed into N*N color-pairs to be displayed on the screen at the same time.

The HP method restricts the user from defining the foreground independently of the background, or vice-versa. Instead, the user must define an entire color-pair at once. Up to M color-pairs, made from 2*M different colors, can be defined this way.

The numeric variables colors and pairs define the number of colors and color-pairs that can be displayed on the screen at the same time. If a terminal can change the definition of a color (for example, the Tektronix 4100 and 4200 series terminals can do this), this should be specified with ccc (can change color). To change the definition of a color (Tektronix method), use initc (initialize color). It requires four arguments: color number (ranging from 0 to colors-1) and three RGB (red, green, and blue) values (ranging from 0 to 1,000).

Tektronix 4100 series terminals use a type of color notation called HLS (Hue Lightness Saturation) instead of RGB color notation. For such terminals one must define a boolean variable hls. The last three arguments to the initc string would then be HLS values: H, ranging from 0 to 360; and L and S, ranging from 0 to 100.

If a terminal can change the definitions of colors, but uses a color notation different from RGB and HLS, a mapping to either RGB or HLS must be developed.

To set current foreground or background to a given color, use setf (set foreground) and setb (set background). They require one parameter: the number of the color. To initialize a color-pair (HP method), use initp (initialize pair). It requires seven parameters: the number of a color-pair (range = 0 to pairs-1), and six RGB values: three for the foreground followed by three for the background. (Each of these groups of three should be in the order RGB.) When initc or initp are used, RGB or HLS arguments should be in the order ``red, green, blue'' or ``hue, lightness, saturation''), respectively. To make a color-pair current, use scp (set color-pair). It takes one parameter, the number of a color-pair.

Some terminals (for example, most color terminal emulators for PCs) erase areas of the screen with current background color. In such cases, bce (background color erase) should be defined. The variable op (original pair) contains a sequence for setting the foreground and the background colors to what they were at the terminal start-up time. Similarly, oc (original colors) contains a control sequence for setting all colors (for the Tektronix method) or color-pairs (for the HP method) to the values they had at the terminal start-up time.

Some color terminals substitute color for video attributes. Such video attributes should not be combined with colors. Information about these video attributes should be packed into the ncv (no color video) variable. There is a one-to-one correspondence between the nine least significant bits of that variable and the video attributes. The following table depicts this correspondence.

Attribute NCV Bit

number

A_STANDOUT 0

A_UNDERLINE 1

A_REVERSE 2

A_BLINK 3

A_DIM 4

A_BOLD 5

A_INVIS 6

A_PROTECT 7

A_ALTCHARSET 8

When a particular video attribute should not be used with colors, the corresponding ncv bit should be set to 1; otherwise it should be set to zero. For example, if the terminal uses colors to simulate reverse video and bold, bits 2 and 5 should be set to 1. The resulting values for ncv will be 22.

Attribute	NCV Bit
	number
A_STANDOUT	0
A_UNDERLINE	1
A_REVERSE	2
A_BLINK	3
A_DIM	4
A_BOLD	5
A_INVIS	6
A_PROTECT	7
A_ALTCHARSET	8

Miscellaneous

If the terminal requires other than a null (zero) character as a pad, then this can be given as pad. Only the first character of the pad string is used. If the terminal does not have a pad character, specify npc.

If the terminal can move up or down half a line, this can be indicated with hu (half-line up) and hd (half-line down). This is primarily useful for superscripts and subscripts on hardcopy terminals. If a hardcopy terminal can eject to the next page (form feed), give this as ff (usually control L).

If there is a command to repeat a given character a given number of times (to save time transmitting a large number of identical characters) this can be indicated with the parameterized string rep. The first parameter is the character to be repeated and the second is the number of times to repeat it. Thus, tparm(repeat_char, 'x', 10) is the same as xxxxxxxxxx.

If the terminal has a settable command character, such as the Tektronix 4025, this can be indicated with cmdch. A prototype command character is chosen which is used in all capabilities. This character is given in the cmdch capability to identify it. The following convention is supported on some UNIX systems: If the environment variable CC exists, all occurrences of the prototype character are replaced with the character in CC.

Terminal descriptions that do not represent a specific kind of known terminal, such as switch, dialup, patch, and network, should include the gn (generic) capability so that programs can complain that they do not know how to talk to the terminal. (This capability does not apply to virtual terminal descriptions for which the escape sequences are known.) If the terminal is one of those supported by the UNIX system virtual terminal protocol, the terminal number can be given as vt. A line-turn-around sequence to be transmitted before doing reads should be specified in rfi.

If the terminal uses xon/xoff handshaking for flow control, give xon. Padding information should still be included so that routines can make better decisions about costs, but actual pad characters will not be transmitted. Sequences to turn on and off xon/xoff handshaking may be given in smxon and rmxon. If the characters used for handshaking are not ^S and ^Q, they may be specified with xonc and xoffc.

If the terminal has a ``meta key'' which acts as a shift key, setting the 8th bit of any character transmitted, this fact can be indicated with km. Otherwise, software will assume that the 8th bit is parity and it will usually be cleared. If strings exist to turn this ``meta mode'' on and off, they can be given as smm and rmm.

If the terminal has more lines of memory than will fit on the screen at once, the number of lines of memory can be indicated with lm. A value of lm#0 indicates that the number of lines is not fixed, but that there is still more memory than fits on the screen.

Media copy strings which control an auxiliary printer connected to the terminal can be given as mc0: print the contents of the screen, mc4: turn off the printer, and mc5: turn on the printer. When the printer is on, all text sent to the terminal will be sent to the printer. A variation, mc5p, takes one parameter, and leaves the printer on for as many characters as the value of the parameter, then turns the printer off. The parameter should not exceed 255. If the text is not displayed on the terminal screen when the printer is on, specify mc5i (silent printer). All text, including mc4, is transparently passed to the printer while an mc5p is in effect.

Special cases

The working model used by terminfo fits most terminals reasonably well. However, some terminals do not completely match that model, requiring special support by terminfo. These are not to be construed as deficiencies in the terminals; they are just differences between the working model and the actual hardware. They may be unusual devices or, for some reason, do not have all the features of the terminfo model implemented.

Terminals which can not display tilde (~) characters, such as certain Hazeltine terminals, should indicate hz.

Terminals which ignore a linefeed immediately after an am wrap, such as the Concept 100, should indicate xenl. Those terminals whose cursor remains on the right-most column until another character has been received, rather than wrapping immediately upon receiving the right-most character, such as the VT100, should also indicate xenl.

If el is required to get rid of standout (instead of writing normal text on top of it), xhp should be given.

Those Teleray terminals whose tabs turn all characters moved over to blanks, should indicate xt (destructive tabs). This capability is also taken to mean that it is not possible to position the cursor on top of a ``magic cookie'' therefore, to erase standout mode, it is instead necessary to use delete and insert line.

Those Beehive Superbee terminals which do not transmit the escape or control-C characters, should specify xsb, indicating that the <F1> key is to be used for escape and the <F2> key for <Ctrl>c.

Similar terminals

If there are two very similar terminals, one can be defined as being just like the other with certain exceptions. The string capability use can be given with the name of the similar terminal. The capabilities given before use override those in the terminal type invoked by use. A capability can be canceled by placing xx@ to the left of the capability definition, where xx is the capability. For example, the entry

att4424-2|Teletype 4424 in display function group ii,
rev@, sgr@, smul@, use=att4424,

defines an AT&T 4424 terminal that does not have the rev, sgr, and smul capabilities, and hence cannot do highlighting. This is useful for different modes for a terminal, or for different user preferences. More than one use capability may be given.

Part 2: Printer capabilities

The terminfo database allows you to define capabilities of printers as well as terminals. To find out what capabilities are available for printers as well as for terminals, see the two lists under ``Part 1: Terminal capabilities'' that list capabilities by variable and by capability name.

Rounding values

Because parameterized string capabilities work only with integer values, we recommend that terminfo designers create strings that expect numeric values that have been rounded. Application designers should note this and should always round values to the nearest integer before using them with a parameterized string capability.

Printer resolution

A printer's resolution is defined to be the smallest spacing of characters it can achieve. In general printers have independent resolution horizontally and vertically. Thus the vertical resolution of a printer can be determined by measuring the smallest achievable distance between consecutive printing baselines, while the horizontal resolution can be determined by measuring the smallest achievable distance between the left-most edges of consecutive printed, identical, characters.

All printers are assumed to be capable of printing with a uniform horizontal and vertical resolution. The view of printing that the terminfo currently presents is one of printing inside a uniform matrix: All characters are printed at fixed positions relative to each ``cell'' in the matrix; furthermore, each cell has the same size given by the smallest horizontal and vertical step sizes dictated by the resolution. (The cell size can be changed as will be seen later.)

Many printers are capable of ``proportional printing'', where the horizontal spacing depends on the size of the character last printed. The terminfo does not make use of this capability, although it does provide enough capability definitions to allow an application to simulate proportional printing.

A printer must not only be able to print characters as close together as the horizontal and vertical resolutions suggest, but also of ``moving'' to a position an integral multiple of the smallest distance away from a previous position. Thus printed characters can be spaced apart a distance that is an integral multiple of the smallest distance, up to the length or width of a single page.

Some printers can have different resolutions depending on different ``modes''. In ``normal mode'', the existing terminfo capabilities are assumed to work on columns and lines, just like a video terminal. Thus the old lines capability would give the length of a page in lines, and the cols capability would give the width of a page in columns. In ``micro mode'', many terminfo capabilities work on increments of lines and columns. With some printers the micro mode may be concomitant with normal mode, so that all the capabilities work at the same time.

Specifying printer resolution

The printing resolution of a printer is given in several ways. Each specifies the resolution as the number of smallest steps per distance:

Specification of printer resolution

Characteristic Number of smallest steps

orhi Steps per inch horizontally

orvi Steps per inch vertically

orc Steps per column

orl Steps per line

When printing in normal mode, each character printed causes movement to the next column, except in special cases described later; the distance moved is the same as the per-column resolution. Some printers cause an automatic movement to the next line when a character is printed in the rightmost position; the distance moved vertically is the same as the per-line resolution. When printing in micro mode, these distances can be different, and may be zero for some printers.

Characteristic	Number of smallest steps
orhi	Steps per inch horizontally
orvi	Steps per inch vertically
orc	Steps per column
orl	Steps per line

Specification of printer resolution

Automatic motion after printing

Normal Mode:.

orc Steps moved horizontally

orl Steps moved vertically

Micro Mode:

mcs Steps moved horizontally

mls Steps moved vertically

Some printers are capable of printing wide characters. The distance moved when a wide character is printed in normal mode may be different from when a regular width character is printed. The distance moved when a wide character is printed in micro mode may also be different from when a regular character is printed in micro mode, but the differences are assumed to be related: If the distance moved for a regular character is the same whether in normal mode or micro mode (mcs=orc), then the distance moved for a wide character is also the same whether in normal mode or micro mode. This doesn't mean the normal character distance is necessarily the same as the wide character distance, just that the distances do not change with a change in normal to micro mode. However, if the distance moved for a regular character is different in micro mode from the distance moved in normal mode\5 (mcs<orc), the micro mode distance is assumed to be the same for a wide character printed in micro mode, as the table below shows.

Automatic motion after printing
Normal Mode:.
orc	Steps moved horizontally
orl	Steps moved vertically
Micro Mode:
mcs	Steps moved horizontally
mls	Steps moved vertically

Specification of printer resolution

Automatic motion after printing wide character

Normal Mode or Micro Mode (mcs = orc):

widcs Steps moved horizontally

Micro Mode (mcs < orc):

mcs Steps moved horizontally

Automatic motion after printing wide character
Normal Mode or Micro Mode (mcs = orc):
widcs	Steps moved horizontally
Micro Mode (mcs < orc):
mcs	Steps moved horizontally

There may be control sequences to change the number of columns per inch (the character pitch) and to change the number of lines per inch (the line pitch). If these are used, the resolution of the printer changes, but the type of change depends on the printer:

Specification of printer resolution

Changing the character/line pitches

cpi Change character pitch

cpix If set, cpi changes orhi, otherwise changes orc

lpi Change line pitch

lpix If set, lpi changes orvi, otherwise changes orl

chr Change steps per column

cvr Change steps per line

Changing the character/line pitches
cpi	Change character pitch
cpix	If set, cpi changes orhi, otherwise changes orc
lpi	Change line pitch
lpix	If set, lpi changes orvi, otherwise changes orl
chr	Change steps per column
cvr	Change steps per line

The cpi and lpi string capabilities are each used with a single argument, the pitch in columns (or characters) and lines per inch, respectively. The chr and cvr string capabilities are each used with a single argument, the number of steps per column and line, respectively.

Using any of the control sequences in these strings will imply a change in some of the values of orc, orhi, orl, and orvi. Also, the distance moved when a wide character is printed, widcs, changes in relation to orc. The distance moved when a character is printed in micro mode, mcs, changes similarly, with one exception: if the distance is 0 or 1, then no change is assumed (see item marked with in the following table).

Programs that use cpi, lpi, chr, or cvr should recalculate the printer resolution (and should recalculate other values -- see ``Effect of changing printing resolution'').

Specification of printer resolution

Effects of changing the character/line pitches

Before After

Using cpi with cpix clear:

orhi' orhi

orc' orc = orhi / Vcpi

Using cpi with cpix set:

orhi' orhi = orc Vcpi

orc' orc

Using lpi with lpix clear:

orvi' orvi

orl' orl = orvi / Vlpi

Using lpi with lpix set:

orvi' orvi = orl Vlpi

orl' orl

Using chr:

orhi' orhi

orc' Vchr

Using cvr:

orvi' orvi

orl' Vcvr

Using cpi or chr:

widcs' widcs = widcs' orc / orc'

mcs' mcs = mcs' orc / orc'

Effects of changing the character/line pitches
Before	After
Using cpi with cpix clear:
orhi'	orhi
orc'	orc = orhi / *Vcpi*
Using cpi with cpix set:
orhi'	orhi = orc *Vcpi*
orc'	orc
Using lpi with lpix clear:
orvi'	orvi
orl'	orl = orvi / *Vlpi*
Using lpi with lpix set:
orvi'	orvi = orl *Vlpi*
orl'	orl
Using chr:
orhi'	orhi
orc'	*Vchr*
Using cvr:
orvi'	orvi
orl'	*Vcvr*
Using cpi or chr:
widcs'	widcs = widcs' orc / orc'
mcs'	mcs = mcs' orc / orc'

Vcpi, Vlpi, Vchr, and Vcvr are the arguments used with cpi, lpi, chr, and cvr respectively. The mark indicates the old value.

Capabilities that cause movement

In the following descriptions, ``movement'' refers to the motion of the ``current position''. With video terminals this would be the cursor; with some printers this is the carriage position. Other printers have different equivalents. In general, the current position is where a character would be displayed if printed.

terminfo has string capabilities for control sequences that cause movement a number of full columns or lines. It also has equivalent string capabilities for control sequences that cause movement a number of smallest steps.

String capabilities for motion

mcub1 Move 1 step left

mcuf1 Move 1 step right

mcuu1 Move 1 step up

mcud1 Move 1 step down

mcub Move N steps left

mcuf Move N steps right

mcuu Move N steps up

mcud Move N steps down

mhpa Move N steps from the left

mvpa Move N steps from the top

The latter six strings are each used with a single argument, N.

String capabilities for motion
mcub1	Move 1 step left
mcuf1	Move 1 step right
mcuu1	Move 1 step up
mcud1	Move 1 step down
mcub	Move N steps left
mcuf	Move N steps right
mcuu	Move N steps up
mcud	Move N steps down
mhpa	Move N steps from the left
mvpa	Move N steps from the top

Sometimes the motion is limited to less than the width or length of a page. Also, some printers do not accept absolute motion to the left of the current position. terminfo has capabilities for specifying these limits.

Limits to motion

mjump Limit on use of mcub1, mcuf1, mcuu1, mcud1

maddr Limit on use of mhpa, mvpa

xhpa If set, hpa and mhpa can't move left

xvpa If set, vpa and mvpa can't move up

If a printer needs to be in a ``micro mode'' for the motion capabilities described above to work, there are string capabilities defined to contain the control sequence to enter and exit this mode. A boolean is available for those printers where using a carriage return causes an automatic return to normal mode.

Limits to motion
mjump	Limit on use of mcub1, mcuf1, mcuu1, mcud1
maddr	Limit on use of mhpa, mvpa
xhpa	If set, hpa and mhpa can't move left
xvpa	If set, vpa and mvpa can't move up

Entering/Exiting micro mode

smicm Enter micro mode

rmicm Exit micro mode

crxm Using cr exits micro mode

The movement made when a character is printed in the rightmost position varies among printers. Some make no movement, some move to the beginning of the next line, others move to the beginning of the same line. terminfo has boolean capabilities for describing all three cases.

Entering/Exiting micro mode
smicm	Enter micro mode
rmicm	Exit micro mode
crxm	Using cr exits micro mode

What happens after character printed in rightmost position

sam Automatic move to beginning of same line

Some printers can be put in a mode where the normal direction of motion is reversed. This mode can be especially useful when no capabilities exist for leftward or upward motion, because those capabilities can be built from the motion reversal capability and the rightward or downward motion capabilities. It is best to leave it up to an application to build the leftward or upward capabilities, though, and not enter them in the terminfo database. This allows several reverse motions to be strung together without intervening wasted steps that leave and reenter reverse mode.

What happens after character printed in rightmost position
sam	Automatic move to beginning of same line

Entering/Exiting reverse modes

slm Reverse sense of horizontal motions

rlm Restore sense of horizontal motions

sum Reverse sense of vertical motions

rum Restore sense of vertical motions

While sense of horizontal motions reversed:

mcub1 Move 1 step right

mcuf1 Move 1 step left

mcub Move N steps right

mcuf Move N steps left

cub1 Move 1 column right

cuf1 Move 1 column left

cub Move N columns right

cuf Move N columns left

While sense of vertical motions reversed:

mcuu1 Move 1 step down

mcud1 Move 1 step up

mcuu Move N steps down

mcud Move N steps up

cuu1 Move 1 line down

cud1 Move 1 line up

cuu Move N lines down

cud Move N lines up

The reverse motion modes should not affect the mvpa and mhpa absolute motion capabilities. The reverse vertical motion mode should, however, also reverse the action of the line ``wrapping'' that occurs when a character is printed in the right most position. Thus printers that have the standard terminfo capability am defined should experience motion to the beginning of the previous line when a character is printed in the right-most position under reverse vertical motion mode.

Entering/Exiting reverse modes
slm	Reverse sense of horizontal motions
rlm	Restore sense of horizontal motions
sum	Reverse sense of vertical motions
rum	Restore sense of vertical motions
While sense of horizontal motions reversed:
mcub1	Move 1 step right
mcuf1	Move 1 step left
mcub	Move N steps right
mcuf	Move N steps left
cub1	Move 1 column right
cuf1	Move 1 column left
cub	Move N columns right
cuf	Move N columns left
While sense of vertical motions reversed:
mcuu1	Move 1 step down
mcud1	Move 1 step up
mcuu	Move N steps down
mcud	Move N steps up
cuu1	Move 1 line down
cud1	Move 1 line up
cuu	Move N lines down
cud	Move N lines up

The action when any other motion capabilities are used in reverse motion modes is not defined; thus, programs must exit reverse motion modes before using other motion capabilities.

Two miscellaneous capabilities complete the list of new motion capabilities. One of these is needed for printers that move the current position to the beginning of a line when certain control characters, like ``line-feed'' or ``form-feed'', are used. The other is used for the capability of suspending the motion that normally occurs after printing a character.

Miscellaneous motion strings

docr List of control characters causing cr

zerom Prevent auto motion after printing next single

character

Miscellaneous motion strings
docr	List of control characters causing cr
zerom	Prevent auto motion after printing next single
	character

Margins

terminfo provides two strings for setting margins on terminals: one for the left and one for the right margin. Printers, however, have two additional margins, for the top and bottom margins of each page. Furthermore, some printers do not require using motion strings to move the current position to a margin and fixing the margin there, as with the existing capabilities, but require the specification of where a margin should be regardless of the current position. Therefore terminfo offers six additional strings for defining margins with printers.

Setting Margins

smgl Set left margin at current column

smgr Set right margin at current column

smgb Set soft bottom margin at current line

smgt Set soft top margin at current line

smgbp Set soft bottom margin at line N

smglp Set soft left margin at column N

smgrp Set soft right margin at column N

smgtp Set soft top margin at line N

The last four strings are used with a single argument, N, that gives the line or column number, where line 0 is the top line and column 0 is the leftmost column.

Setting	Margins
smgl	Set left margin at current column
smgr	Set right margin at current column
smgb	Set soft bottom margin at current line
smgt	Set soft top margin at current line
smgbp	Set soft bottom margin at line N
smglp	Set soft left margin at column N
smgrp	Set soft right margin at column N
smgtp	Set soft top margin at line N

Note that not all printers use 0 for the top line or the leftmost column.

All margins can be cleared with mgc.

Shadows, italics, wide characters, superscripts, subscripts

Five new sets of strings are used to describe the capabilities printers have of enhancing printed text.

Enhanced printing

sshm Enter shadow-printing mode

rshm Exit shadow-printing mode

sitm Enter italicizing mode

ritm Exit italicizing mode

swidm Enter wide character mode

rwidm Exit wide character mode

ssupm Enter superscript mode

rsupm Exit superscript mode

supcs List of characters available as superscripts

ssubm Enter subscript mode

rsubm Exit subscript mode

subcs List of characters available as subscripts

If a printer requires the sshm control sequence before every character to be shadow-printed, the rshm string is left blank. Thus programs that find a control sequence in sshm but none in rshm should use the sshm control sequence before every character to be shadow-printed; otherwise, the sshm control sequence should be used once before the set of characters to be shadow-printed, followed by rshm. The same is also true of each of the sitm/ritm, swidm/rwidm, ssupm/rsupm, and ssubm/rsubm pairs.

Enhanced printing
sshm	Enter shadow-printing mode
rshm	Exit shadow-printing mode
sitm	Enter italicizing mode
ritm	Exit italicizing mode
swidm	Enter wide character mode
rwidm	Exit wide character mode
ssupm	Enter superscript mode
rsupm	Exit superscript mode
supcs	List of characters available as superscripts
ssubm	Enter subscript mode
rsubm	Exit subscript mode
subcs	List of characters available as subscripts

Note that terminfo also has a capability for printing emboldened text (bold). While shadow printing and emboldened printing are similar in that they ``darken'' the text, many printers produce these two types of print in slightly different ways. Generally, emboldened printing is done by overstriking the same character one or more times. Shadow printing likewise usually involves overstriking, but with a slight movement up and/or to the side so that the character is ``fatter''.

It is assumed that enhanced printing modes are independent modes, so that it would be possible, for instance, to shadow print italicized subscripts.

As mentioned earlier, the amount of motion automatically made after printing a wide character should be given in widcs.

If only a subset of the printable ASCII characters can be printed as superscripts or subscripts, they should be listed in supcs or subcs strings, respectively. If the ssupm or ssubm strings contain control sequences, but the corresponding supcs or subcs strings are empty, it is assumed that all printable ASCII characters are available as superscripts or subscripts.

Automatic motion made after printing a superscript or subscript is assumed to be the same as for regular characters. Thus, for example, printing any of the following three examples will result in equivalent motion:

Bi B[i] B[i]

Note that the existing msgr boolean capability describes whether motion control sequences can be used while in ``standout mode''. This capability is extended to cover the enhanced printing modes added here. msgr should be set for those printers that accept any motion control sequences without affecting shadow, italicized, widened, superscript, or subscript printing. Conversely, if msgr is not set, a program should end these modes before attempting any motion.

Alternate character sets

In addition to allowing you to define line graphics (described in ``Line graphics''), terminfo also lets you define alternate character sets. The following capabilities cover printers and terminals with multiple selectable or definable character sets.

Alternate character sets

scs Select character set N

scsd Start definition of character set N, M characters

defc Define character A, B dots wide, descender D

rcsd End definition of character set N

csnm List of character set names

daisy Printer has manually changed print-wheels

The scs, rcsd, and csnm strings are used with a single argument, N, a number from 0 to 63 that identifies the character set. The scsd string is also used with the argument N and another, M, that gives the number of characters in the set. The defc string is used with three arguments: A gives the ASCII code representation for the character, B gives the width of the character in dots, and D is zero or one depending on whether the character is a ``descender'' or not. The defc string is also followed by a string of ``image-data'' bytes that describe how the character looks (see below).

Alternate character sets
scs	Select character set N
scsd	Start definition of character set N, M characters
defc	Define character A, B dots wide, descender D
rcsd	End definition of character set N
csnm	List of character set names
daisy	Printer has manually changed print-wheels

Character set 0 is the default character set present after the printer has been initialized. Not every printer has 64 character sets, of course; using scs with an argument that does not select an available character set should cause a null result from tparm().

If a character set has to be defined before it can be used, the scsd control sequence is to be used before defining the character set, and the rcsd is to be used after. They should also cause a null result from tparm() when used with an argument N that doesn't apply. If a character set still has to be selected after being defined, the scs control sequence should follow the rcsd control sequence. By examining the results of using each of the scs, scsd, and rcsd strings with a character set number in a call to tparm(), a program can determine which of the three are needed.

Between use of the scsd and rcsd strings, the defc string should be used to define each character. To print any character on printers covered by terminfo, the ASCII code is sent to the printer. This is true for characters in an alternate set as well as ``normal'' characters. Thus the definition of a character includes the ASCII code that represents it. In addition, the width of the character in dots is given, along with an indication of whether the character should descend below the print line (like the lower case letter ``g'' in most character sets). The width of the character in dots also indicates the number of image-data bytes that will follow the defc string. These image-data bytes indicate where in a dot-matrix pattern ink should be applied to ``draw'' the character; the number of these bytes and their form are defined below under ``Dot-matrix graphics''.

It is easiest for the creator of terminfo entries to refer to each character set by number; however, these numbers will be meaningless to the application developer. The csnm string alleviates this problem by providing names for each number.

When used with a character set number in a call to tparm(), the csnm string will produce the equivalent name. These names should be used as a reference only. No naming convention is implied, although anyone who creates a terminfo entry for a printer should use names consistent with the names found in user documents for the printer. Application developers should allow a user to specify a character set by number (leaving it up to the user to examine the csnm string to determine the correct number), or by name, where the application examines the csnm string to determine the corresponding character set number.

These capabilities are likely to be used only with dot-matrix printers. If they are not available, the strings should not be defined. For printers that have manually changed print-wheels or font cartridges, the boolean daisy is set.

Dot-matrix graphics

Dot-matrix printers typically have the capability of reproducing ``raster-graphics'' images. Three new numeric capabilities and three new string capabilities can help a program draw raster-graphics images independent of the type of dot-matrix printer or the number of pins or dots the printer can handle at one time.

Dot-matrix graphics

npins Number of pins, N, in print-head

spinv Spacing of pins vertically in pins per inch

spinh Spacing of dots horizontally in dots per inch

porder Matches software bits to print-head pins

sbim Start printing bit image graphics, B bits wide

rbim End printing bit image graphics

The sbim string is used with a single argument, B, the width of the image in dots.

Dot-matrix graphics
npins	Number of pins, N, in print-head
spinv	Spacing of pins vertically in pins per inch
spinh	Spacing of dots horizontally in dots per inch
porder	Matches software bits to print-head pins
sbim	Start printing bit image graphics, B bits wide
rbim	End printing bit image graphics

The model of dot-matrix or raster-graphics that the terminfo presents is similar to the technique used for most dot-matrix printers: each pass of the printer's print-head is assumed to produce a dot-matrix that is N dots high and B dots wide. This is typically a wide, squat, rectangle of dots. The height of this rectangle in dots will vary from one printer to the next; this is given in the npins numeric capability. The size of the rectangle in fractions of an inch will also vary; it can be deduced from the spinv and spinh numeric capabilities. With these three values an application can divide a complete raster-graphics image into several horizontal strips, perhaps interpolating to account for different dot spacing vertically and horizontally.

The sbim and rbim strings are used to start and end a dot-matrix image, respectively. The sbim string is used with a single argument that gives the width of the dot-matrix in dots. A sequence of ``image-data bytes'' are sent to the printer after the sbim string and before the rbim string. The number of bytes is an integral multiple of the width of the dot-matrix; the multiple and the form of each byte is determined by the porder string as described below.

The porder string is a comma separated list of pin numbers; the position of each pin number in the list corresponds to a bit in a data byte. The pins are numbered consecutively from 1 to npins, with 1 being the top pin. Note that the term ``pin'' is used loosely here; ``ink-jet'' dot-matrix printers do not have pins, but can be considered to have an equivalent method of applying a single dot of ink to paper. The bit positions in porder are in groups of 8, with the first position in each group the most significant bit and the last position the least significant bit.

The ``image-data bytes'' are to be computed from the dot-matrix image, mapping vertical dot positions in each print-head pass into eight-bit bytes, using a 1 bit where ink should be applied and 0 where no ink should be applied. If a position is skipped in porder, a 0 bit is used. There must be a multiple of 8 bit positions used or skipped in porder; if not, 0 bits are used to fill the last byte in the least significant bits.

Effect of changing printing resolution

If the control sequences to change the character pitch or the line pitch are used, the pin or dot spacing may change:

Dot-matrix graphics

Changing the character/line pitches

cpi Change character pitch

cpix If set, cpi changes spinh

lpi Change line pitch

lpix If set, lpi changes spinv

Programs that use cpi or lpi should recalculate the dot spacing:

Dot-matrix graphics
Changing the character/line pitches
cpi	Change character pitch
cpix	If set, cpi changes spinh
lpi	Change line pitch
lpix	If set, lpi changes spinv

Dot-matrix graphics

Effects of changing the character/line pitches

Before After

Using cpi with cpix clear:

spinh' spinh

Using cpi with cpix set:

spinh' spinh = spinh' orhi / orhi'

Using lpi with lpix clear:

spinv' spinv

Using lpi with lpix set:

spinv' spinv = spinv' orhi / orhi'

Using chr:

spinh' spinh

Using cvr:

spinv' spinv

orhi' and orhi are the values of the horizontal resolution in steps per inch, before using cpi and after using cpi, respectively. Likewise, orvi' and orvi are the values of the vertical resolution in steps per inch, before using lpi and after using lpi, respectively. Thus, the changes in the dots per inch for dot-matrix graphics follow the changes in steps per inch for printer resolution.

Dot-matrix graphics
Effects of changing the character/line pitches
Before	After
Using cpi with cpix clear:
spinh'	spinh
Using cpi with cpix set:
spinh'	spinh = spinh' orhi / orhi'
Using lpi with lpix clear:
spinv'	spinv
Using lpi with lpix set:
spinv'	spinv = spinv' orhi / orhi'

Using chr:
spinh'	spinh
Using cvr:
spinv'	spinv

Print quality

Many dot-matrix printers can alter the dot spacing of printed text to produce near ``letter quality'' printing or ``draft quality'' printing. Usually, it is important to be able to choose one or the other because the rate of printing generally falls off as the quality improves. There are three new strings used to describe these capabilities.

Print quality

snlq Set near-letter quality print

snrmq Set normal quality print

sdrfq Set draft quality print

The capabilities are listed in decreasing levels of quality. If a printer does not have all three levels, one or two of the strings should be left blank as appropriate.

Print quality
snlq	Set near-letter quality print
snrmq	Set normal quality print
sdrfq	Set draft quality print

Printing rate and buffer size

Because there is no standard protocol that can be used to keep a program synchronized with a printer, and because modern printers can buffer data before printing it, a program generally cannot determine at any time what has been printed. Two new numeric capabilities can help a program estimate what has been printed.

Print rate/buffer size

cps Nominal print rate in characters per second

bufsz Buffer capacity in characters

cps is the nominal or average rate at which the printer prints characters; if this value is not given, the rate should be estimated at one-tenth the prevailing baud rate. bufsz is the maximum number of subsequent characters buffered before the guaranteed printing of an earlier character, assuming proper flow control has been used. If this value is not given it is assumed that the printer does not buffer characters, but prints them as they are received.

Print rate/buffer size
cps	Nominal print rate in characters per second
bufsz	Buffer capacity in characters

As an example, if a printer has a 1000-character buffer, then sending the letter ``a'' followed by 1000 additional characters is guaranteed to cause the letter ``a'' to print. If the same printer prints at the rate of 100 characters per second, then it should take 10 seconds to print all the characters in the buffer, less if the buffer is not full. By keeping track of the characters sent to a printer, and knowing the print rate and buffer size, a program can synchronize itself with the printer.

Note that most printer manufacturers advertise the maximum print rate, not the nominal print rate. A good way to get a value to put in for cps is to generate a few pages of text, count the number of printable characters, then see how long it takes to print the text.

Applications that use these values should recognize the variability in the print rate. Straight text, in short lines, with no embedded control sequences will probably print at close to the advertised print rate and probably faster than the rate in cps. Graphics data with a lot of control sequences, or very long lines of text, will print at well below the advertised rate and below the rate in cps. If the application is using cps to decide how long it should take a printer to print a block of text, the application should pad the estimate. If the application is using cps to decide how much text has already been printed, it should shrink the estimate. The application will thus err in favor of the user, who wants, above all, to see all the output in its correct place.

Warning

As described in the ``Tabs and initialization'' section above, a terminal's initialization strings, is1, is2, and is3, if defined, must be output before a curses program is run. An available mechanism for outputting such strings is tput init (see tput(C) and profile(M)).

If a null character (\0) is encountered in a string, the null and all characters after it are lost. Therefore it is not possible to code a null character (\0) and send it to a device (either terminal or printer). The suggestion of sending a \0200, where a \0 (null) is needed can succeed only if the device (terminal or printer) ignores the eighth bit. For example, because all eight bits are used in the standard international ASCII character set, devices that adhere to this standard will treat \0200 differently from \0.

Tampering with entries in /usr/lib/.COREterm/?/ or /usr/lib/terminfo/?/ (for example, changing or removing an entry) can affect programs such as vi that expect the entry to be present and correct. In particular, removing the description for the ``dumb'' terminal will cause unexpected problems.

Files

/usr/lib/terminfo/?/: compiled terminal description database
/usr/lib/.COREterm/?/: subset of compiled terminal description database
/usr/lib/tabset/: tab settings for some terminals, in a format appropriate to be output to the terminal (escape sequences that set margins and tabs)

key_f44	kf44	FY	KEY_F(44), 0464, sent by function key f44
key_f45	kf45	FZ	KEY_F(45), 0465, sent by function key f45
key_f46	kf46	Fa	KEY_F(46), 0466, sent by function key f46
key_f47	kf47	Fb	KEY_F(47), 0467, sent by function key f47
key_f48	kf48	Fc	KEY_F(48), 0470, sent by function key f48
key_f49	kf49	Fd	KEY_F(49), 0471, sent by function key f49
key_f50	kf50	Fe	KEY_F(50), 0472, sent by function key f50
key_f51	kf51	Ff	KEY_F(51), 0473, sent by function key f51
key_f52	kf52	Fg	KEY_F(52), 0474, sent by function key f52
key_f53	kf53	Fh	KEY_F(53), 0475, sent by function key f53
key_f54	kf54	Fi	KEY_F(54), 0476, sent by function key f54
key_f55	kf55	Fj	KEY_F(55), 0477, sent by function key f55
key_f56	kf56	Fk	KEY_F(56), 0500, sent by function key f56
key_f57	kf57	Fl	KEY_F(57), 0501, sent by function key f57
key_f58	kf58	Fm	KEY_F(58), 0502, sent by function key f58
key_f59	kf59	Fn	KEY_F(59), 0503, sent by function key f59
key_f60	kf60	Fo	KEY_F(60), 0504, sent by function key f60
key_f61	kf61	Fp	KEY_F(61), 0505, sent by function key f61
key_f62	kf62	Fq	KEY_F(62), 0506, sent by function key f62
key_f63	kf63	Fr	KEY_F(63), 0507, sent by function key f63
key_find	kfnd	@0	KEY_FIND, 0552, sent by find key
key_help	khlp	%1	KEY_HELP, 0553, sent by help key
key_home	khome	kh	KEY_HOME, 0406, sent by home key
key_ic	kich1	kI	KEY_IC, 0513, sent by ins-char/enter ins-mode key
key_il	kil1	kA	KEY_IL, 0511, sent by insert-line key
key_left	kcub1	kl	KEY_LEFT, 0404, sent by terminal left-arrow key
key_ll	kll	kH	KEY_LL, 0533, sent by home-down key
key_mark	kmrk	%2	KEY_MARK, 0554, sent by mark key
key_message	kmsg	%3	KEY_MESSAGE, 0555, sent by message key
key_move	kmov	%4	KEY_MOVE, 0556, sent by move key
key_next	knxt	%5	KEY_NEXT, 0557, sent by next key
key_npage	knp	kN	KEY_NPAGE, 0522, sent by next-page key
key_open	kopn	%6	KEY_OPEN, 0560, sent by open key
key_options	kopt	%7	KEY_OPTIONS, 0561, sent by options key
key_ppage	kpp	kP	KEY_PPAGE, 0523, sent by previous-page key
key_previous	kprv	%8	KEY_PREVIOUS, 0562, sent by previous-object key
key_print	kprt	%9	KEY_PRINT, 0532, sent by print or copy key
key_redo	krdo	0	KEY_REDO, 0563, sent by redo key
key_reference	kref	&1	KEY_REFERENCE, 0564, sent by ref(erence) key
key_refresh	krfr	&2	KEY_REFRESH, 0565, sent by refresh key
key_replace	krpl	&3	KEY_REPLACE, 0566, sent by replace key
key_restart	krst	&4	KEY_RESTART, 0567, sent by restart key
key_resume	kres	&5	KEY_RESUME, 0570, sent by resume key
key_right	kcuf1	kr	KEY_RIGHT, 0405, sent by terminal right-arrow key
key_save	ksav	&6	KEY_SAVE, 0571, sent by save key
key_sbeg	kBEG	&9	KEY_SBEG, 0572, sent by shifted beginning key
key_scancel	kCAN	&0	KEY_SCANCEL, 0573, sent by shifted cancel key
key_scommand	kCMD	1	KEY_SCOMMAND, 0574, sent by shifted command key
key_scopy	kCPY	2	KEY_SCOPY, 0575, sent by shifted copy key
key_screate	kCRT	3	KEY_SCREATE, 0576, sent by shifted create key
key_sdc	kDC	4	KEY_SDC, 0577, sent by shifted delete-char key
key_sdl	kDL	5	KEY_SDL, 0600, sent by shifted delete-line key
key_select	kslt	6	KEY_SELECT, 0601, sent by select key
key_send	kEND	7	KEY_SEND, 0602, sent by shifted end key
key_seol	kEOL	8	KEY_SEOL, 0603, sent by shifted clear-line key
key_sexit	kEXT	9	KEY_SEXIT, 0604, sent by shifted exit key
key_sf	kind	kF	KEY_SF, 0520, sent by scroll-forward/down key
key_sfind	kFND	0	KEY_SFIND, 0605, sent by shifted find key
key_shelp	kHLP	#1	KEY_SHELP, 0606, sent by shifted help key
key_shome	kHOM	#2	KEY_SHOME, 0607, sent by shifted home key
key_sic	kIC	#3	KEY_SIC, 0610, sent by shifted input key
key_sleft	kLFT	#4	KEY_SLEFT, 0611, sent by shifted left-arrow key
key_smessage	kMSG	%a	KEY_SMESSAGE, 0612, sent by shifted message key
key_smove	kMOV	%b	KEY_SMOVE, 0613, sent by shifted move key
key_snext	kNXT	%c	KEY_SNEXT, 0614, sent by shifted next key
key_soptions	kOPT	%d	KEY_SOPTIONS, 0615, sent by shifted options key
key_sprevious	kPRV	%e	KEY_SPREVIOUS, 0616, sent by shifted prev key
key_sprint	kPRT	%f	KEY_SPRINT, 0617, sent by shifted print key
key_sr	kri	kR	KEY_SR, 0521, sent by scroll-backward/up key
key_sredo	kRDO	%g	KEY_SREDO, 0620, sent by shifted redo key
key_sreplace	kRPL	%h	KEY_SREPLACE, 0621, sent by shifted replace key
key_sright	kRIT	%i	KEY_SRIGHT, 0622, sent by shifted right-arrow key
key_srsume	kRES	%j	KEY_SRSUME, 0623, sent by shifted resume key
key_ssave	kSAV	!1	KEY_SSAVE, 0624, sent by shifted save key
key_ssuspend	kSPD	!2	KEY_SSUSPEND, 0625, sent by shifted suspend key
key_stab	khts	kT	KEY_STAB, 0524, sent by set-tab key
key_sundo	kUND	!3	KEY_SUNDO, 0626, sent by shifted undo key
key_suspend	kspd	&7	KEY_SUSPEND, 0627, sent by suspend key
key_undo	kund	&8	KEY_UNDO, 0630, sent by undo key
key_up	kcuu1	ku	KEY_UP, 0403, sent by terminal up-arrow key
keypad_local	rmkx	ke	Out of ``keypad-transmit'' mode
keypad_xmit	smkx	ks	Put terminal in ``keypad-transmit'' mode
lab_f0	lf0	l0	Labels on function key f0 if not f0
lab_f1	lf1	l1	Labels on function key f1 if not f1
lab_f2	lf2	l2	Labels on function key f2 if not f2
lab_f3	lf3	l3	Labels on function key f3 if not f3
lab_f4	lf4	l4	Labels on function key f4 if not f4
lab_f5	lf5	l5	Labels on function key f5 if not f5
lab_f6	lf6	l6	Labels on function key f6 if not f6
lab_f7	lf7	l7	Labels on function key f7 if not f7
lab_f8	lf8	l8	Labels on function key f8 if not f8
lab_f9	lf9	l9	Labels on function key f9 if not f9
lab_f10	lf10	la	Labels on function key f10 if not f10
label_format	fln	Lf	Label format
label_off	rmln	LF	Turn off soft labels
label_on	smln	LO	Turn on soft labels
meta_off	rmm	mo	Turn off ``meta mode''
meta_on	smm	mm	Turn on ``meta mode'' (8th bit)
micro_column_address	mhpa	ZY	Like column_address for micro adjustment
micro_down	mcud1	ZZ	Like cursor_down for micro adjustment
micro_left	mcub1	Za	Like cursor_left for micro adjustment
micro_right	mcuf1	Zb	Like cursor_right for micro adjustment
micro_row_address	mvpa	Zc	Like row_address for micro adjustment
micro_up	mcuu1	Zd	Like cursor_up for micro adjustment
newline	nel	nw	Newline (behaves like cr followed by lf)
order_of_pins	porder	Ze	Matches software bits to print-head pins
orig_colors	oc	oc	Set all color(-pair)s to the original ones
orig_pair	op	op	Set default color-pair to the original one
pad_char	pad	pc	Pad character (rather than null)
parm_dch	dch	DC	Delete #1 chars (G)
parm_delete_line	dl	DL	Delete #1 lines (G)
parm_down_cursor	cud	DO	Move down #1 lines. (G)

parm_down_micro	mcud	Zf	Like parm_down_cursor for micro adjust. (G)
parm_ich	ich	IC	Insert #1 blank chars (G)
parm_index	indn	SF	Scroll forward #1 lines. (G)
parm_insert_line	il	AL	Add #1 new blank lines (G)
parm_left_cursor	cub	LE	Move cursor left #1 spaces (G)
parm_left_micro	mcub	Zg	Like parm_left_cursor for micro adjust. ()
parm_right_cursor	cuf	RI	Move right #1 spaces. (G)
parm_right_micro	mcuf	Zh	Like parm_right_cursor for micro adjust. ()
parm_rindex	rin	SR	Scroll backward #1 lines. (G)
parm_up_cursor	cuu	UP	Move cursor up #1 lines. (G)
parm_up_micro	mcuu	Zi	Like parm_up_cursor for micro adjust. ()
pkey_key	pfkey	pk	Prog funct key #1 to type string #2
pkey_local	pfloc	pl	Prog funct key #1 to execute string #2
pkey_xmit	pfx	px	Prog funct key #1 to xmit string #2
plab_norm	pln	pn	Prog label #1 to show string #2
print_screen	mc0	ps	Print contents of the screen
prtr_non	mc5p	pO	Turn on the printer for #1 bytes
prtr_off	mc4	pf	Turn off the printer
prtr_on	mc5	po	Turn on the printer
pulse	pulse	PU	Select pulse dialing
quick_dial	qdial	QD	Dial phone number #1, without progress detection
remove_clock	rmclk	RC	Remove time-of-day clock
repeat_char	rep	rp	Repeat char #1 #2 times (G)
req_for_input	rfi	RF	Send next input char (for ptys)
reset_1string	rs1	r1	Reset terminal completely to sane modes
reset_2string	rs2	r2	Reset terminal completely to sane modes
reset_3string	rs3	r3	Reset terminal completely to sane modes
reset_file	rf	rf	Name of file containing reset string
restore_cursor	rc	rc	Restore cursor to position of last sc
row_address	vpa	cv	Vertical position absolute (G)
save_cursor	sc	sc	Save cursor position
scroll_forward	ind	sf	Scroll text up
scroll_reverse	ri	sr	Scroll text down
select_char_set	scs	Zj	Select character set ()
set_attributes	sgr	sa	Define the video attributes (G) #1-#9
set_background	setb	Sb	Set current background color
set_bottom_margin	smgb	Zk	Set bottom margin at current line
set_bottom_margin_parm	smgbp	Zl	Set bottom margin at line #1 ()
set_clock	sclk	SC	Set time-of-day clock
set_color_pair	scp	sp	Set current color-pair
set_foreground	setf	Sf	Set current foreground color1
set_left_margin	smgl	ML	Set left margin at current line
set_left_margin_parm	smglp	Zm	Set left margin at column #1 ()
set_right_margin	smgr	MR	Set right margin at current column
set_right_margin_parm	smgrp	Zn	Set right margin at column #1 ()
set_tab	hts	st	Set a tab in all rows, current column
set_top_margin	smgt	Zo	Set top margin at current line
set_top_margin_parm	smgtp	Zp	Set top margin at line #1 ()
set_window	wind	wi	Current window is lines #1-#2 cols #3-#4 (G)
start_bit_image	sbim	Zq	Start printing bit image graphics ()
start_char_set_def	scsd	Zr	Start definition of a character set ()
stop_bit_image	rbim	Zs	End printing bit image graphics
stop_char_set_def	rcsd	Zt	End definition of a character set
subscript_characters	subcs	Zu	List of ``subscript-able'' characters
superscript_characters	supcs	Zv	List of ``superscript-able'' characters
tab	ht	ta	Tab to next 8-space hardware tab stop
these_cause_cr	docr	Zw	Printing any of these chars causes cr
to_status_line	tsl	ts	Go to status line, col #1 (G)
tone	tone	TO	Select touch tone dialing
underline_char	uc	uc	Underscore one char and move past it
up_half_line	hu	hu	Half-line up (reverse 1/2 linefeed)
user0	u0	u0	User string 0
user1	u1	u1	User string 1
user2	u2	u2	User string 4
user3	u3	u3	User string 3
user4	u4	u4	User string 4
user5	u5	u5	User string 5
user6	u6	u6	User string 6
user7	u7	u7	User string 7
user8	u8	u8	User string 8
user9	u9	u9	User string 9
wait_tone	wait	WA	Wait for dial tone
xoff_character	xoffc	XF	X-off character
xon_character	xonc	XN	X-on character
xon_character	xonc	XN	Alternate XON character (scancode mode)
xoff_character	xoffc	XF	Alternate XOFF character (scancode mode)
zero_motion	zerom	Zx	No motion for the subsequent character

terminfo(M)

Syntax

Description

Part 1: Terminal capabilities

Sample entry

Types of capabilities in the sample entry

Preparing descriptions

Basic capabilities

Parameterized strings

Cursor motions

Area clears

Insert/delete line

Insert/delete character

Highlighting, underlining, and visible bells

Keypad

Tabs and initialization

Delays

Status lines

Line graphics

Color manipulation

Miscellaneous

Special cases

Similar terminals

Part 2: Printer capabilities

Rounding values

Printer resolution

Specifying printer resolution

Capabilities that cause movement

Margins

Shadows, italics, wide characters, superscripts, subscripts

Alternate character sets

Dot-matrix graphics

Effect of changing printing resolution

Print quality

Printing rate and buffer size

Warning

Files

See also