Avoiding interrupt clashes on PCI/ISA bus machines
On machines with both PCI and ISA buses,
the PCI auto-configuration code cannot read the
configuration of cards in the ISA bus slots. You
must use the computer manufacturer's setup program
to tell the auto-configuration code which interrupts are in use
by ISA bus cards. If you do not mark these interrupts
as ``used'', it is possible that there will be an interrupt clash
between an ISA bus card and a PCI bus card.
Using the manufacturer's setup program
Installing the hardware
© 2003 Caldera International, Inc. All rights reserved.
SCO OpenServer Release 5.0.7 -- 11 February 2003