Running the MMDF Configuration Manager
MMDF Configuration Manager
to perform the initial MMDF configuration
Subsequently, you can run the MMDF Configuration Manager at any time
to change the initial mail configuration.
You must re-run the MMDF Configuration Manager
when you make a major change to the system,
such as when you connect your machine to a new network or
remove it from an existing one.
Before you use the MMDF Configuration Manager:
Ensure that the
MMDF component of the MAIL package
is installed with your SCO OpenServer system.
to determine this and to install the component if necessary.
If you are configuring
mail for two or more computers on a network,
you must ensure that the network is configured and that
the systems involved can communicate with each other.
Configure all communications channels that you plan
to use to route mail--see
``Managing mail channels''.
The MMDF Configuration Manager configures MMDF for UUCP, Micnet, and SMTP.
MMDF supports other companies' mail products that
provide channel programs, but you cannot use the MMDF Configuration Manager
to configure MMDF to use these.
Contact the vendor that supplied the mail software
for information on how to configure their product.
For information on configuring UUCP, see
If a password for user mmdf does not exist,
create one now.
Perform all mail configuration and administrative tasks while
logged in as mmdf.
The exception to this rule (removing a user) is explained in
``Adding or removing a mail user''.
Start the MMDF Configuration Manager by
opening the Mail window as described in
``How to start a Mail manager'',
then double-clicking on the MMDF Configuration icon,
or by entering this at a command line:
Fill in the configuration information required.
``MMDF configuration information''
describes the information that you must provide.
which describes situations in which the MMDF Configuration Manager may build an
incorrect or incomplete MMDF configuration for your site.
If your configuration changes for some reason after running
the MMDF Configuration Manager (for example, you might add a new UUCP host),
you should reexamine this list.
Test the new configuration using the utilities described in
``Testing MMDF configuration''.
MMDF configuration information
Problems with SCOadmin Mail Managers
© 2003 Caldera International, Inc. All rights reserved.
SCO OpenServer Release 5.0.7 -- 11 February 2003