Port does not respond
If your serial or parallel port does not respond:
Verify that the parallel or serial card is properly seated:
Turn the power off and open the machine.
Remove and reseat the card in the bus.
Run the Hardware/Kernel Manager to configure the
serial port and parallel port drivers
and verify that the port is listed in your kernel configuration.
``Configuring drivers with the Hardware/Kernel Manager''.
Verify that the card itself is correctly configured.
Check the documentation provided with the card.
If possible, try setting the card for a different configuration.
The card may be defective. Try replacing it.
Printer output is illegible
Cannot redirect output to printer
© 2003 Caldera International, Inc. All rights reserved.
SCO OpenServer Release 5.0.7 -- 11 February 2003