Configuring the Point-to-Point Protocol (PPP)

Removing the PPP stack

To remove the PPP stack and its associated endpoints:

Run the Network Configuration Manager as root.
Select SCO TCP/IP PPP driver from the list.
Select Remove network device from the Hardware menu.
Select Yes when prompted to deconfigure the stack. You see several messages as the PPP drivers are removed from the kernel.
Select Exit from the Add hardware menu.
Select Yes when prompted to relink the kernel, and enter y at the two prompts that appear shortly after.
Shut the system down and reboot it by using the System Shutdown Manager as described in the SCO OpenServer Handbook. Remember to select Reboot after shutdown when using the manager.