Slot number
Some adapters (for example, the
HP EtherTwist EISA Adapter Card/32)
are meant to be used on machines using a
EISA, MCA, or PCMCIA bus.
If you install one of these adapters and the adapter
is not detected in the machine, you may be required to
provide its ``slot number'' during the configuration process.
This number refers to the slot in which the adapter is inserted.
Next topic:
Source routing
Previous topic:
Shared RAM address
© 2003 Caldera International, Inc. All rights reserved.
SCO OpenServer Release 5.0.7 -- 11 February 2003