IPX addresses
IPX addresses are used to identify
clients and servers on an IPX network.
``IPX address fields''
describes the fields that make up an address.
IPX address fields
Field
|
Type*
|
Byte order
|
Network number
|
uint8[4]
|
high-to-low
|
Node number
|
uint8[6]
|
high-to-low
|
Socket number
|
uint8[2]
|
high-to-low
|
*-
A uint8 is an unsigned char.
|
|
|
network number-
is a 4-byte number associated with the cabling
system to which the server is attached.
For SCO IPX/SPX servers
or application servers loaded on such file servers,
the network number is the server's internal network number.
node number-
is a 6-byte number that identifies the network adapter
card in the computer.
This node address is the hardware address assigned to
the network adapter card by it's vendor.
For SCO IPX/SPX servers,
this field is always set to 0x000000000001.
A value of 0xFFFFFFFFFFFF can be placed in this field
to indicate a broadcast to the local network.
socket number-
is a 2-byte number that identifies the
process address in the computer.
The process can use either a well-known, static socket number
or obtain a dynamic socket number when the process binds to IPX.
For more information about static and dynamic socket numbers, see
``Socket numbers''.
IPX addresses are represented by
ipxAddr_t structures.
The ipxAddr_t structure has the following format:
struct {
unsigned char net
[ 4 ];
unsigned char node
[ 6 ];
unsigned char sock
[ 2 ];
} ipxAddr_t;
The types of addresses are:
source address-
The address of the
sender of the packet.
By definition, the sender is aware of its address.
destination address-
The address of the
recipient of the packet.
The sender has to obtain the address of the recipient.
The procedure for obtaining a destination address is described in
``Obtaining a destination address''.
Obtaining a destination address
An application can obtain the destination
address of a server by:
querying SAPD-
for the address of the recipient.
``Using the SAP protocol''
describes this procedure.
scanning a file server bindery-
for the destination address.
This method assumes that you have already established
a connection to a NetWare file server.
``Using the SAP protocol''
describes this procedure.
creating a mapping table-
that maps a server name to an address.
Next topic:
Socket numbers
Previous topic:
Byte order
© 2003 Caldera International, Inc. All rights reserved.
SCO OpenServer Release 5.0.7 -- 11 February 2003